Draper VMS/KD Instrucciones - Página 4

Navegue en línea o descargue pdf Instrucciones para Sierra Draper VMS/KD. Draper VMS/KD 4 páginas. Mitre saw

To get the best from your saw and ensure it is correctly set ensure the following is

correct:

(a) The saw blade is tensioned sufficiently to avoid 'whip' which will cause the blade to

deviate from a true cut.

(b) The blade is 'in line' and central to the frame.

(d) Tension is always released after use.

(e) The correct type of blade for the application is used.

(f) After assembly and setting has been carefully carried out, always test your mitre

saw and the angles with some scrap timber to ensure the machine is assembled

correclty and cutting true.

Spare blades are available for this Mitre Saw.

Hursley Road, Chandler's Ford, Eastleigh, Hants. SO53 1YF. U.K.

IMPORTANT WARNING

SPARE BLADES

DRAPER TOOLS LIMITED,

Helpline: (023) 8049 4344.

Sales Desk: (023) 8049 4333.

General Enquiries: (023) 8026 6355.

Fax: (023) 8026 0784.

http://www.draper.co.uk

No part of this publication may be reproduced,

stored in a retrieval system or transmitted in

any form or by any means, electronic, mechanical

photocopying, recording or otherwise without prior

permission in writing from Draper Tools Ltd.

Draper Stock No. 60506 ..............14tpi

60507 ..............18tpi

60508 ..............24tpi