Draper 15BLA Manual de instrucciones - Página 7
Navegue en línea o descargue pdf Manual de instrucciones para Compresor de aire Draper 15BLA. Draper 15BLA 12 páginas. 50, 100 & 120 litre compressors
OPERATION
1. Connect the compressor to the power supply.
Always turn the machine on and off by means of
the appropriate switch ✫✌ Fig.4 located on top
of the pressure switch box.
2. Check that the reservoir drain valve is closed
✬✌ Fig.5.
3. This compressor is controlled by a pressure
switch assembly ✭✌ Fig.6 which automatically
cuts off the power supply to the motor when the
maximum operating pressure is reached and
restarts the compressor when the compressor
drops below the pre-set minimum.
4. To start the compressor turn the switch to the
ON position as shown in Fig.7.
The pressure switch is pre-set at the factory and
the compressor is also fitted with an overload
safety relief valve in the event of the pressure
switch not functioning correctly.
5. To stop the compressor turn the pressure switch
to the OFF position. Do not switch off at the
power supply before switching off at the
machine. See Fig.8.
Fig.4.
✫✌
Fig.5.
Fig.6.
Fig.7.
Fig.8.
- 7 -
✬✌
✭✌