Draper Stormforce 98437 Manual - Página 15

Navegue en línea o descargue pdf Manual para Amoladora Draper Stormforce 98437. Draper Stormforce 98437 20 páginas. Angle grinder/cut-off tool

Imprimir página

OPERATION

9.1

ON/OFF SWITCH – FIG.6

− To start the power tool, push the ON/OFF

switch (1) forward.

− To lock the ON/OFF switch (1), press the

switch down at the front until it latches.

− To switch off the power tool, release the ON/

OFF switch (1) or, if it is locked, briefly push

down the back of the switch and then release it.

Warning! Do not set the machine down until the

spindle has completely stopped.

Note: During use, keep clothing out of the line of

any sparks formed. Sparks from metal grinding can

set fire to many types of clothing in a short time.

The risk is less if your outer clothing is made of

wool, or flame retardant treated cotton.

Dust : A correctly fitted dust mask, suitable for the

activity and in accordance to the relevant standard,

must be worn.

9.2

GRINDING – FIG.7

When performing grinding operations maintain an

angle of approximately 30° between the work

surface and the disc face.

Only use abrasives specifically designed for this task.

9.3

CUTTING

Important legal information:

– Cutting operations should only be attempted

in conjunction with the guard fitted to this

grinder.

– This guard must be fitted for your safety.

– When performing cutting-off operations do

not incline the machine as this can lead to

the abrasive wheel becoming jammed,

damaged or excessively and abnormally

worn.

– Only use abrasives specifically designed for

this task.

(1)

FIG.

LOCK ON

FIG.

Warning! As the abrasive wheel wears

during use, its diameter reduces. This

reduces the peripheral speed and the

machine's efficiency. This results in

increased load on the grinding machine

which if continued will damage the motor.

Ensure that the diameter of the wheel is

within 25% of its original size.

Important: Excessive pressure on the

machine does not result in a higher abrasive

efficiency. Excessive pressure increases

wear and tear on the accessory and will

damage the angle grinder which is not

covered under the guarantee.

– 15 –

OFF