Draper FlexShade 2 Pocket Headbox Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Mobiliario interior Draper FlexShade 2 Pocket Headbox. Draper FlexShade 2 Pocket Headbox 8 páginas. Maximized coverage for large, tall areas, while also reducing light gap

Draper FlexShade 2 Pocket Headbox Manual de instrucciones
FlexShade
®

Section 6 - Electrical Connections

Shade operates on 110-120V, 60 Hz. current. Shade is shipped with internal wiring complete and control switch
cable lead. Wire to connect shade to switch
attached wiring diagram, and wiring should comply with national and local electrical codes. DO NOT wire motors in parallel without written permission from Draper.
All operating switches should be "off" before power is connected.
Please Note: For low voltage wiring requirements, Draper recommends consulting with a professional low voltage electrical contractor. It is very important that
shielded and stranded CAT 5 cable be used to prevent any electrical interference.
Section 7 - IntelliFlex I/O Components, Wiring and Controls
Contact
Closure
Interface
Network
Device Connector
Network
Device Connector
Wall Switch
Data Cable
with RJ45
Connector
Dashed Wiring
by Electrician
4 - GROUND - (BROWN)
3 - POWER + (BLUE)
2 - DATA - (ORANGE)
1 - DATA + (ORANGE/WHITE)
2 Pocket Headbox
, and switch
to power supply, should be furnished by installer. Connections should be made in accordance with
(es)
(es)
Controls & System Overview
AV Gateway
Network
Device Connector
Network
Device Connector
RS485
I/O 120V
120VAC
AC Motor
Motor
M12
Connectors
B W G
110-120V Line
Data Cable Pin-Out - RJ45 Connector
1 - DATA + (ORANGE/WHITE)
2 - DATA - (ORANGE)
3 - N/A (GREEN/WHITE)
4 - POWER + (BLUE)
5 - POWER - (BLUE/WHITE)
6 - N/A (GREEN)
7 - GROUND - (BROWN/WHITE)
8 - GROUND - (BROWN)
120VAC Motors
Handheld
Remote
Wireless
Device Connector
Gateway
Network
Device Connector
Device Connector
RS485
I/O 120V
120VAC
AC Motor
Motor
Wall Switch
B W G
Data Cable
with RJ45
Connector
Dashed Wiring
by Electrician
110-120V Line
fully boxed, and standardly supplied with a 6'
(es)
Contact
Closure
Interface
Network
Network
page 6 of 8