Draper Storm Force DA650SF Manual del usuario - Página 14
Navegue en línea o descargue pdf Manual del usuario para Sander Draper Storm Force DA650SF. Draper Storm Force DA650SF 20 páginas. 650w 230v 125mm dual action polisher
Imprimir página
9. OPERATING THE POLISHER
9.1 OPERATING THE POLISHER
SWITCH - FIGS. 5 - 6
To turn on the machine, push the ON/OFF switch
and push it towards the head of the tool. The
machine will be locked and keep turning. To release
the machine move the switch back to the original
position.
9.2 STEPPED SPEED SETTING-
FIG. 7
Set the stepped speed in accordance to the cutting
paste/compound or polish being used. Read the
manufacturers instructions regarding this.
No responsibility or liability is accepted by Draper
Tools regarding the setting of the correct speed for
the job to be done. The speed settings are
approximately as per table below.
SETTING
SPEED (OPM)
1
2000
2
3000
3
3500
4
4500
5
5500
6
6400
NOTE: We strongly recommend that the polisher,
speed setting, the polishing sponge/mop and
medium being used are tested on a small, inobscure
area before applying to a vehicle panel or similar.
IMPORTANT: Excessive pressure on the machine
does not result in higher working speed. It increases
wear on the internal mechanics and can damage the
polisher.
USAGE
Waxing & buffering
Waxing & buffering
Polishing & cleaning
Polishing & cleaning
Removing paint defects
& oxidation
Removing paint defects
& oxidation
- 14 -
FIG.7
FIG.5
FIG.6