Draw P120 Manual de instrucciones

Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento industrial Draw P120. Draw P120 3 páginas.

Imprimir página

INSTRUCTION MANUAL

READ CAREFULY THIS MANUAL BEFORE THE INSTALLATION

1- SAFETY TECNOLOGY

One of the main objectives of the companies is the reduction of production costs and at the same

time to increase productivity. In this context, the ergonomics in the workstation is of importance

maximum. The Draw™ Retractors Balancers provide safety and convenience in the production

and assembly systems. Your constructive manner make them safe and durable as well as an

indispensable item in the workbenches and assembly lines.

2- INSTALLATION MODE

Hang the balancer by swivel hook assembled on its top. The balancer should be placed directly

over the work area. Your assembly must be done in such a way that minimizes the contact of the

cable in the cable guide, in other words, perpendicularly. To prevent the fall/dropping of the

balancer, install and secure, as indicated in the figure, a safety chain. The length of the safety

chain should be the lowest possible, preventing that in case of rupture of the hook of sustaining

the balancer does not fall more than 150 to 300 mm.

CORRECT

Keep the load hanging

perpendicularly.

The fitting with trolley allows a better operation of the balancer and allows a greater area of

coverage.

A- The Draw™ Balancers models P35 to P120 leave factory with steel

cable of the 2,2m useful and 0,5m additional cable that is outside the

body of the balancer which may be increased, if the user want, rising

the cable gland (never down the cable gland because the cable will be

loose and may overlap, locking the balancer).

B- All Draw™ Balancers is factory preset to the specified mid-range

load. Ex: a balancer model P-35 has specified, on the label, the

capacity from 32 to 38 kg and leaves factory preset to load of 35 kg.

P35 from 32Kg to 38Kg

P40 from 36Kg to 43Kg

P45 from 42Kg to 49Kg

P50 from 47Kg to 54Kg

P55 from 55Kg to 58Kg

P60 from 56Kg to 65Kg

Fig. A

P70 from 64 to76Kg

P80 from 72 to 86Kg

P90 from 82 to 96Kg

P110 from 94 to 108Kg

P110 from 104 to 116Kg

P120 from 112 to 132Kg

INCORRECT

Working with the inclined

load causes premature wear

of the cable and the reel and

excessive effort from the

operator.