Advanced Energy Industries LumaSense Technologies E2T Quasar 2 Series Manual de inicio rápido - Página 2
Navegue en línea o descargue pdf Manual de inicio rápido para Instrumentos de medida Advanced Energy Industries LumaSense Technologies E2T Quasar 2 Series. Advanced Energy Industries LumaSense Technologies E2T Quasar 2 Series 2 páginas. Flare monitors
Imprimir página
Connecting the Power Supply
The Quasar 2 can be powered by 24 V DC and
115/230 V AC.
Caution: Only one of the three power supply
possibilities should be connected!
All electrical connections are made through
terminal strips on the left side of the housing
(wire range 14 – 22 AWG (0.4 mm
Connecting the Outputs
All electrical connections are made through
terminal strips on the right side of the housing
(wire range 14 to 22 AWG (0.4 mm
Wires should be routed to the unit through
the 3/4" NPT threaded conduit port located on
the right side of the housing.
Connect lines for the relay to the terminal, as
shown in Figure 2.
LumaSense Technologies | An Advanced Energy Company
Americas, Australia, Asia
Sales & Service
Santa Clara, CA
Ph: +1 408 727 1600
Fax: +1 408 727 1677
LumaSense Technologies, Inc., reserves the right to change
the information in this publication at any time.
- 2 mm
)).
2
2
Figure 1 (left side view)
- 2 mm
)).
2
2
Figure 2 (right side view)
Europe, Middle East, Africa
Sales & Service
Frankfurt, Germany
Ph: +49 69 97373 0
Fax: +49 69 97373 167
All rights reserved. LumaSense Technologies, Inc., a subsidiary of Advanced Energy Industries, Inc.
Connect wires as shown in Figure 1. Wires
should be routed to the unit through the 3/4"
NPT threaded conduit port located on the left
side of the housing.
Connect 24 V DC or 115/230 V AC 50/60 Hz as
indicated.
Connect the 4 / 20 mA current output to the
terminal for switched and/or continuous
output (Advanced Model Only), as shown in
Figure 2.
Positive mA to mA (+)
Negative mA to mA (-)
Temperature and Gas Sensing Solutions
India
Sales & Support Center
Mumbai, India
Ph: +91 22 67419203
Fax: +91 22 67419201
©2019 LumaSense Technologies - Quasar 2 Quickstart-EN 3915088 Rev. B 01/10/2019
China
Sales & Support Center
Shanghai, China
Ph: +86 133 1182 7766
Ph: +86 21 5899 7915
www.lumasenseinc.com