1More ComfoBuds Z Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Auriculares inalámbricos 1More ComfoBuds Z. 1More ComfoBuds Z 2 páginas.

Imprimir página

Product Overview

Silicone Ear Tip

Charging Pin

LED Indicator for

Headphone Status

Charging Case

Placement

Power On: Take the headphones out of

the charging case (with charge), the

headphones will turn on automatically.

* Above functions are available for either headphone in individual or Stereo mode.

Charging

To charge the case with Type-C cable.

Full charge will take

around 80 minutes.

To charge the headphones with the case.

Put the headphones into the correct slot

until it locks in via magnetic click. LEDs will

indicate headphone status LEDs breathing

in white indicate headphones are charging.

Full charge will take around 85

minutes. Headphone status

LEDs glow in white indicating

charging is complete.

Controls

Phone call function is not available on these headphones, and the playback controls must

be implemented on the connected device.

Please download 1MORE MUSIC APP for the sleep playlist.

Switch Listening Modes via APP

Enter the 1MORE ComfoBuds Z home page in 1MORE MUSIC APP after pairing to your

cellphone, then you can switch listening modes between "Music" and "Soothing".

Home

1MORE ComfoBuds Z

Battery

Listening Modes

Music

Soothing

Soothing Sounds

Click the timer icon in the song page to set up the playtime.

* Volume ajustment for the soothing sounds can only be implemented via APP.

Extra Functions

If headphones cannot pair normally when they power on. Put both headphones into the case,

press and hold the pairing button in the case for 3 seconds and the headphone status LEDs

ﬂash in white, and then headphones will start searching for Left & Right pairing.

For single mode: put Left and Right earbuds in the case, double-click the pairing button and

enter the separate pairing for single earbud. Then the Left and Right earbuds can be connected

to different cellphones.

To unpair the device: Press and hold the pairing button in the case for 3 seconds to disconnect

the earbuds and the device.

* Functions of 1MORE MUSIC APP may vary with different cellphones or operating

systems. For more details, please contact our customer service.

We Appreciate Your Business

We know you will enjoy new 1MORE headphones as much as we do. At 1MORE, we value your

satisfaction. If you would like more details on this product or any of our other products, please visit

us online by scanning the QR code. Go to www.1more.com and sign up for VIP, and 1MORE will

treat you like one.

Tips

1. Please read this instruction manual carefully and retain for future reference.

2. Please fully charge the battery before ﬁrst use.

3. If the headphones have been unused for more than 3 months, we recommend that you charge

them. This will improve battery capacity.

4. Only use charging cables and adapters that are FCC (Federal Communications Commission)

approved.

5. In dry environments, static electricity may numb your ear. This is not related to the quality of the

product.

Safety Information

1. Never disassemble the headphones. There are no user-serviceable parts inside.

2. Do not expose the headphones to temperatures below 32 °F (0 °C) or to temperatures above

113 °F (45 °C).

3. Do not use the headphones in a thunderstorm storm. This could prevent the headphones from

working properly, and also increase your chance of being electrically shocked.

4. Do not use oil or any volatile liquid to clean this product.

5. Do not listen at high volumes for extended periods of time.

6. Do not use the headphones in trafﬁc. Do not use the headphones any time it would be

dangerous to be unaware of noises around you.

7. Adult supervision is required for children of age 6 and under.

8. If you don't feel comfortable after wearing the headphones, please refer to an aurist for advice

on whether in-ear headphones are suitable for you.

WEEE

Electrical and electronic equipment, parts and batteries marked with this symbol must not be

disposed of with normal household wastage, it must be collected and disposed of separately to

protect the environment.

Your 1MORE retailer will advise you of the correct way of disposal in your country.

Safety Caution

Do not expose batteries or battery packs to excessive heat such as sunshine, ﬁre or the like.

Declaration of Conformity Hereby, Tiinlab Acoustic Technology Limited declares that the radio

equipment type 1MORE ComfoBuds Z of EH601 is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address:

www.1more.com

RF exposure information: The device has been evaluated to meet general RF exposure requirement.

The device can be used in portable exposure condition without restriction. Radiation Exposure

Statement Power is so low that no RF exposure calculation is needed.

Declaration for EU Compliance

Operation Frequency/Max. EIRP: 2400-2483.5MHz, Max. EIRP is 9.10dBm.

FCC

The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types EH601

(FCC ID: 2ASDIEH601) has also been tested against this SAR limit.

This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modiﬁcations or changesto this equipment. Such modiﬁcations or changes could void the user's

authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates uses

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

‐ Reorient or relocate the receiving antenna.

‐ Increase the separation between the equipment and receiver.

‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

‐Consult the dealer or an experienced radio/TV technician for help.

Supplier's Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Unique Identiﬁer:

Trade Name: 1MORE

Model No.: EH601

Responsible Party – U.S. Contact Information

1MORE USA, Inc.

Address: 10225 Barnes Canyon Road, Suite A202, San Diego, California, 92121

Tel: 1-855-551-6673

E-Mail: [email protected]

Headphone

Pairing Button

Charging Case LED Indicator

The LED light of the charging case

will indicate different battery status:

red light indicates low battery, orange

light indicates medium battery and

green light indicates full battery.

River

Time Setup

mins

In The Box

Headphones × 1 set

Type-C Charging Cable × 1 Silicone Ear Tip × 3 sets

Charging Case

User Guide × 1

Fit

Silicone Ear Tip

XS / S / M / L

Replace

Headphones Pairing

The Left and Right headphones will automatically

pair to each other after the lid is open when they

are in the case (with charge).

Headphones taken out of the case that fail to pair

to each other will enter sleep mode. Put the

headphones back into the charging case (with

charge), and they will pair to each other

automatically.

Bluetooth Pairing To The Device

To connect to your device during ﬁrst use, turn the

headphones on to enter pairing mode, the LEDs for

headphone status will ﬂash in white. Headphones will

enter sleep mode if not paired to a device within 2

minutes.

* After ﬁrst successful pairing, headphones will

automatically connect to your device.

To skip previously paired device and pair with a new

one, put headphones back into the case, press and

hold the pairing button for 3 seconds when powered

on (no playback) to re-enter pairing mode.

* Above functions are available for either headphone in individual or Stereo mode.

Battery Notiﬁcation

LED indicator for case battery status:

when case battery is too low on charge,

LED indicator will glow solid red for 10

seconds.

When headphones are placed in charging

case and the LED on charging case

ﬂashes 10 times, the case has low battery,

please charge the case ﬁrst.

Soothing Sounds

Click the "Soothing Sounds" to enter the playlist.

Home

1MORE ComfoBuds Z

Battery

1MORE ComfoBuds Z

Listening Modes

Battery

Music

Soothing

Listening Modes

Music

Soothing

Soothing Sounds

Click "+" to select the sound to be downloaded to your headphones for listening.

Soothing Sounds

Allow adding 2 tracks

Falls

Midﬁre

Volcano

1MORE (1) Year Limited Warranty

1MORE Inc., ("1MORE") warrants to the original retail purchaser that this product is to be free from

defective materials and workmanship for a period of one year from the date of purchase if it is

properly used and maintained. If this product proves defective in either material or workmanship,

1MORE, at its option, will (a) repair the product with new or refurbished parts, or (b) replace the

product with an equivalent new or refurbished product, at no charge for parts or labor. If the

product model is no longer available and cannot be repaired effectively or replaced with an

identical model, 1MORE at its sole option may replace the unit with a current model of equal or

greater value. In some cases, modiﬁcation to the mounting surface may be required where a new

model is substituted. 1MORE assumes no responsibility or liability for such modiﬁcation. TO

OBTAIN A REPAIR OR REPLACEMENT UNDER THE TERMS OF THIS WARRANTY, PLEASE

RETURN TO THE ORIGINAL DEALER FIRST AND THE ORIGINAL DEALER SHALL REPAIR THE

PRODUCT WITH NEW OR REFURBISHED PARTS OR REPLACE THE PRODUCT WITH AN

EQUIVALENT NEW OR REFURBISHED PRODUCT.

You will be required to submit a proof of purchasing details, including but not limited to a receipt or

sales invoice.

Return shipping for exchanges/repairs is the sole responsibility of the original retail purchaser.

Limitations:

• This limited warranty does not cover the failure of the product resulting from improper installation,

misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or environmental

deterioration.

• This limited warranty does not cover cosmetic damage, including paint damage, or

consequential damage to other components or premises which may result for any reason from the

failure of the product.

• This limited warranty is null and void for products not used in accordance with 1MORE's

instructions.

• This limited warranty is null and void for products with altered or missing serial numbers and for

products not purchased from an AUTHORIZED dealer.

• This limited warranty terminates if you sell or otherwise transfer this product to another party.

FAQ

1. How to make sure the headphones have been fully charged?

Put the headphones into the charging case, if the headphone stutus LEDs are glowing this means

they have been fully charged.

2. Why won't headphones turn on?

Check if your headphones have enough battery life. If not, please charge them for at least 30 minutes.

3. Why won't the headphones connect to my cellphone, or take a long time to connect?

Put both buds back into the charging case, then press and hold the pairing button for 3 seconds, click

the device name in your settings, they should now pair correctly to the phone.

4. Why won't the headphones make phone calls?

The headphones are without microphones or phone call functions.

5. Why is the Bluetooth connection not stable and/or experiences some interruptions?

1) Try shortening the distance between your headphones and the device. Avoid solid barriers in

between you and the device.

2) Please keep away from strong interference sources, such as Wi-Fi and GPRS.

3) Please make sure the Bluetooth antenna of your device is not blocked.

6. Why can'tt the volume be adjusted by the cellphone buttons when playing soothing sounds in 1MORE

MUSIC APP?

The soothing sounds are stored in the ﬂash of the headphone which can be adjusted only via the APP.

7. The headphones will be disconnected from the cellphone when out of wireless range. They cannot

restore the connection after returning back into the wireless range, how to solve it?

Click the device name in the cellphone pairing list to connect again.

8. I feel uncomfortable when wearing the headphones, how to solve it?

This is mainly because the sizes of ear tips and your canals are not snug, we suggest trying smaller ear

tips.

* For more detailed product FAQs, please visit the product support section under www.1more.com

Warning

Replacement of a battery with an incorrect type that can defeat a safeguard (such as catching

ﬁre, explosion, leakage of corrosive electrolyte etc);

Disposal of a battery into ﬁre or a hot oven, or mechanically crushing or cutting of a battery, that

can result in an explosion;

Leaving a battery in an extremely high temperature surrounding environment that can result in an

explosion or the leakage of ﬂammable liquid or gas; and A battery subjected to extremely low air

pressure that may result in an explosion or the leakage of ﬂammable liquid or gas.

The symbol indicates DC voltage.

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment

(WEEE). This means that this product must be handled pursuant to European directive

2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or to the retailer

when he buys a new electrical or electronic equipment.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Model: EH601

Headphone Weight: 2.7 g

Bluetooth Playtime: approx. 2.5 h*

Case Weight: 34 g

* Headphones + Case Fully Charged

Product Weight: 39.4 g

BLE Local Playtime: approx. 14 h*

Headphone Size: 24 × 9.2 × 14.2 mm

Bluetooth Playtime: approx. 10 h*

Case Size: 60 × 30 × 38.5 mm

Impedance: 22 Ω

Headphone Battery Capacity: 30 mAh

Wireless Range: 10 m

Case Battery Capacity: 410 mAh

Bluetooth: Bluetooth

Headphone Charging Time: 85 mins

Bluetooth Protocol: A2DP / AVRCP / BLE

Case Charging Time: 80 mins

Input: 5V 1A

Battery Life

Frequency Band: 2.400 GHz ~ 2.4835 GHz

* Headphone Fully Charged

BLE Local Playtime: approx. 3.5 h

The specifications are acquired from laboratory tested data.

* The playtime, tested under the laboratory condition of AAC format and 50% volume, may vary

with different device setting, environments, usage and other factors.

Manufacturer: Tiinlab Acoustic Technology Limited

Address: Tianliao Building 1403, Zone A Tianliao Industrial Park, Taoyuan Str.,

Nanshan Dist., Shenzhen, P.R. China

Product information can be found at www.1more.com

(XS/S/M/L)

Warranty Card × 1

River

Falls

Midﬁre

River

Volcano

5.0