Bosch WLK20261BY Manual de instrucciones - Página 30
Navegue en línea o descargue pdf Manual de instrucciones para Lavadora Bosch WLK20261BY. Bosch WLK20261BY 38 páginas.
Imprimir página
Positioning and connecting
en
If the washing machine is raised by
■
protruding components (e.g.
washing machine door), the
components may break off and the
washing machine may be damaged.
Do not lift the washing machine by
protruding parts.
If in doubt, have the appliance
Note:
connected by a technician.
Installation surface
The washing machine must be
Note:
stable so that it does not move around.
The surface on which it is installed
■
must be firm and level.
Soft floors/floor coverings are not
■
suitable.
Installation on a base or a
wooden joist floor
Caution!
Damage to the appliance
The washing machine may "wander"
and tip/topple from the base when
spinning.
Always secure the washing machine
feet with fixing brackets*.
Holding brackets: order no. WMZ 2200
If installing on a wooden joist
Note:
ceiling:
If possible, install the washing
■
machine in a corner.
Screw a water-resistant wooden
■
panel (min. 30 mm thick) to the floor.
Installing the appliance in a
kitchenette
:
Warning
Danger of death!
Danger of death if live parts are
touched.
Do not remove the appliance cover
panel.
30
Notes
Recess width of 60 cm required.
■
Only install the washing machine
■
underneath a continuous worktop
that is securely connected to
adjacent cabinets.
Removing the transport locks
Caution!
Damage to the appliance
The washing machine is secured for
■
transportation using transport locks.
If the transport locks are not
removed, the drum, for example,
may become damaged when the
washing machine is operated.
Before using the appliance for the
first time, make sure that you
completely remove all four transport
locks. Keep the locks in a safe
place.
To prevent transport damage from
■
occurring if the appliance is moved
at a later date, you must refit the
transport locks before transporting
the appliance.
Store the screw and sleeve screwed
together.
Take the hoses out of the holders.
1.
Take hoses out of the elbow and
2.
remove elbow.
Unscrew and remove all four
3.
transport brace screws.