Drawmer MXPRO-30 Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Equipos de grabación Drawmer MXPRO-30. Drawmer MXPRO-30 15 páginas. Dual gated compressor

MX30 OPERATORS' MANUAL

COM PRESSOR

Threshold:

Ratio:

Gain Reduction

Meter:

OUTPUT

Gain:

Input / Output

Level Meter:

This control determines the input level above which gain reduction

will be applied and may be set in the range -40 to +20dB. Soft knee

compression takes place for signals exceeding the threshold level

by up to 10dB above which level, conventional 'ratio' compression

is applied.

Sets the final compression ratio that will be applied once the 10dB

'soft-knee' region is exceeded. The ratio may be continuously

adjusted from 1.2:1 to

hard limiting.

A nine segment LED bargraph meter continuously monitors the

gain reduction applied by the compressor/limiter over the range 0

to 30dB.

The output level may be attenuated or amplified by up to 20dB to

compensate for level changes caused by compression and limiting.

This control comes before the Peak limiter detector and this fact

should be taken into account when setting the Peak limiter

threshold.

This is an eight-segment LED bargraph level meter that monitors

the level of the output signal over the range -20dB to +15dB with

reference to the selected (-10dBu or +4dBu) operating level. When

Bypass is enabled, this meter will show the level of the

unprocessed signal passing through the unit.

(infinity):1 allowing the possibility of true