Drawmer MXPRO-50 Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Equipo de música Drawmer MXPRO-50. Drawmer MXPRO-50 13 páginas. Dual de-esser

MX50 OPERATORS' MANUAL

De-Ess Band

Full

Split

Bypass

Link

Setup

Start with the controls set as follows, and adjust as necessary:-

Process some sibilant material and increase the De-ess control. You will notice that

frequencies around 8KHz produce reductions in signal level, which can be monitored

using the G.R display.

Adjust the frequency and de-ess controls for optimum results. Use the "Air" and "Split

Band" switches as necessary to get the most transparent results.

Reduces the total signal level in response to signals in the selected

frequency band. This mode of operation produces less phase

shifting of broadband material and single vocals but is

noticeable then Split band processing. Applying excessive gain

reduction in this mode can lead to the vocal sound taking on a

lisping quality.

Split band operation will only reduce the selected frequencies

above the value set via the frequency control, which in most

situations produces fewer audible side effects during de-essing.

This is particularly useful for reducing string noise on guitars,

breath noise on flute, or composite material.

The Bypass position routes the input signal to the output with no

processing. These switches are independent of any linking and will

only bypass their respective channel.

Linking

Depressing this switch configures the unit for stereo operation

where the average left/right signal level is used as the floating

threshold. The two individual channels must still be set up as in

mono operation. Usually they will be set the same, but in some

circumstances, it is permissible to use different settings i.e. when

sibilants are excessive on one channel of a stereo programme.

In linked mode, the red status Link LED will be illuminated.

Frequency

-- Clockwise at 6KHz

De-Ess

-- Anticlockwise

Air

-- Out

Band

-- Full

Bypass

-- Out