Bosch 300 Series Manual de instalación - Página 8

Appliance dimensions

Electrical Requirements:

a three prong grounded outlet

▯

120 V, 60 Hz, AC only

▯

20 Amp electrical supply with a fuse or a circuit

▯

breaker

This product must be connected to a supply circuit of the

proper voltage and frequency. Wire size must conform to

the requirements of the National Electric Code or the

prevailing local code for this rating. The power supply

cord and plug should be brought to a separate 20-amp

branch circuit single grounded outlet. The outlet box

Note: To avoid possible damage to the work surface or

to the bottom of the appliance, cover the work surface.

Remove any remaining contents from the microwave

oven cavity.

Remove the screws from the mounting plate.

Power Requirements

The outlet must be properly grounded in accordance with

all applicable codes.

It can be installed inside the cabinet above the

appliance.

should be located inside the cabinet above the appliance

(see section Location Requirements). The outlet box and

supply circuit should be installed by a qualified

electrician and conform to the National Electrical Code or

the prevailing local code.

The voltage used must be the same as specified on this

microwave oven. Using a higher voltage is dangerous

and may result in a fire or oven damage. Using a lower

voltage will cause slow cooking. The dealer is not

responsible for any damages resulting from the use of

the oven with any voltage other than specified.

The mounting plate will be used as the rear wall

template and for mounting.