Bosch 46 HBN 44 Manual de instrucciones de instalación - Página 13
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Horno Bosch 46 HBN 44. Bosch 46 HBN 44 28 páginas. Electric built-in single & double oven
También para Bosch 46 HBN 44: Manual de uso y mantenimiento (48 páginas), Manual de uso y mantenimiento (48 páginas), Manual de instrucciones de instalación (28 páginas)
Imprimir página
FINAL
CHECK
LIST
To prevent
improper
connections
leading
to dam-
age of electrical
components
and so voiding
the
warranty,
the following
steps must be performed:
1.
Check
the electrical
requirements
and make
sure you have
the correct
electrical
supply
and that the oven is properly
grounded.
2.
Make sure all control
knobs are in the off po-
sition.
3.
Turn on the power
supply to the oven. When
the oven
is first turned
on the display
will
come
on showing
all the call-outs
and then
will become
blank
with the Set Clock
sym-
bol in the upper
right
corner,
as shown
be-
low.
SET (_
0
@
J
.
Check power
at the junction
box wires using
a volt meter having
a range of 0-250 VAC. If
you
have installed
the oven
for use on 240
volt supply
you should
find that the voltage
reading
between
the
black
and
red
wires
(Line to Line) should be 220 to 240 volts. If
you have modified
the oven(s)
for use on 208
volt the voltage
reading
between
the black
and red wires should be 190 to 208 volts.
5.
Set
the
time
of
day
by pressing
the
Set
Clock button
and pressing
the plus (+) or mi-
nus (-) button,
to the right of the display
to
set the correct
time. Once the time is set de-
press
the Set Clock button
to enter the time.
A "beep"
will sound and the Set Clock sym-
bol in the upper right will disappear.
6.
Turn the Mode
Selector
knob to Manual
po-
sition, the Selector
knob to Bake and turn the
Temperature
knob
to 350
°F. The cooling
fan, the oven lights and the heat light should
come on to indicate
that the oven is heating.
The heat light will turn off when the set tem-
perature
(350 °F) is reached.
Turn Tempera-
ture knob to off. If you have installed
a dou-
ble oven repeat test tk_r second oven.
7.
To check
the other
oven
functions
refer
to
the Using
the Oven
Controls
section
of the
Use and Care Manual.
8.
If the oven is working
properly
turn the Se-
lector
knob(s)
and the Temperature
Control
knob(s)
to their off positions
and turn off the
power
supply to the oven.
9.
Place
the
cover
on the junction
box
and
make sure the cover is securely
fastened
and
turn on the power
to the oven.
10.
Leave
these
INSTALLATION
instructions
as well as the USE AND CARE
MANUAL
with the owner.
11