en Time-setting options
10.2 Setting the timer
The timer runs independently of the appliance when it
is in operation. The timer can be set when the appli-
ance is switched on or off, up to 23 hours and 59
minutes. The timer has its own audible signal so that
you can tell whether it is the timer or a cooking time
which has elapsed.
Press .
1.
a The symbol lights up red.
Use the control ring to set the timer duration.
2.
Press to start the timer.
3.
The timer starts automatically after a few seconds.
a The timer counts down.
a When the appliance is switched off, you will still be
able to see the timer counting down in the display.
a When the appliance is switched on, the display
shows the settings for the current operation. To dis-
play the timer for a few seconds, press .
a An audible signal sounds once the timer duration
has elapsed. The red symbol goes out.
4.
Once the timer duration has elapsed:
To stop the signal early, press any touch field.
‒
To set another timer, press and use the control
‒
ring to set the time.
Changing the timer
You can change the timer duration at any time.
Press .
1.
Use the control ring to change the duration of the
2.
timer.
Press to confirm.
3.
Cancelling the timer
You can cancel the timer duration at any time.
Press .
1.
Use the control ring to reset the duration of the
2.
timer to zero.
Press to confirm.
3.
a The red symbol goes out.
10.3 Setting the cooking time
You can set a cooking time for operation of up to 23
hours 59 minutes.
Requirement: The type of heating and temperature or
setting have been set.
Press
.
1.
a The symbol lights up red.
Use the control ring to set the cooking time.
2.
Direction of rotation
Left
Right
The cooking time can be set in one-minute incre-
ments up to one hour, and then in five-minute incre-
ments. The end time is calculated automatically.
Press to start.
3.
a The appliance starts to heat and the cooking time
counts down.
a When the time has elapsed, a signal sounds. The
time shown in the display is zero.
When the cooking time has elapsed:
4.
To stop the signal early, press any touch field.
‒
12
Default value
10 minutes
30 minutes
To set another cooking time, press
‒
the control ring to set the time.
To continue without setting a cooking time, press
‒
to start.
When the food is ready, press
‒
appliance off.
Changing the cooking time
You can change the cooking time at any time.
Press
.
1.
Use the control ring to change the cooking time.
2.
Press
to confirm.
3.
Cancelling the cooking time
You can cancel the cooking time at any time.
Press
.
1.
Use the control ring to reset the cooking time to
2.
zero.
Press
to confirm.
3.
To continue without setting a cooking time, press
‒
to start.
10.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡ In order to achieve a good cooking result, do not
delay the end time once the appliance is already in
operation.
¡ Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡ The type of heating and temperature or setting have
been set.
¡ A cooking time is set.
Press
again.
1.
Use the control ring to delay the end time.
2.
Press to start.
3.
a The display shows the start time. The appliance is in
standby mode.
a Once the start time has been reached, the appli-
ance starts to heat up and the cooking time starts
counting down.
a When the time has elapsed, a signal sounds. The
time shown in the display is zero.
When the cooking time has elapsed:
4.
To stop the signal early, press any touch field.
‒
To set another cooking time, press
‒
the control ring to set the time.
To continue without setting a cooking time, press
‒
to start.
When the food is ready, press
‒
appliance off.
Changing the end time
In order to achieve a good cooking result, only change
the set end time before operation starts and the cook-
ing time is counting down.
Press to pause operation.
1.
Press
twice.
2.
Use the control ring to change the end time.
3.
Press to continue operation.
4.
and use
to switch the
and use
to switch the
Imprimir página