BD Diesel Performance X-Monitor 1085002 Manual de instalación - Página 11

Navegue en línea o descargue pdf Manual de instalación para Instrumentos de medida BD Diesel Performance X-Monitor 1085002. BD Diesel Performance X-Monitor 1085002 13 páginas. Digital pyro & boost pressure monitor

Imprimir página

6 November 2006

BD X-Monitor (Pyro & Boost Only)

The "ALARM" number is the temperature for which the display will display an alarm

at with this temperature setting is achieved. The "ALARM" setting can be changed

by pressing on the upper MODIFY button. It will increase the value upwards in

increments of 10 until "1500" then will jump back down to "700".

By pressing the MENU (bottom) button again, the screen will change to the

"TURBO" screen.

As with the "PYRO" screen mentioned above, the "TURBO"

numbers is the current reading and "MAX" is the historical peak pressure. Changing

the "ALARM" setting is the same as "PYRO" but the value increase in increments of

1 then will jump to "10" once you surpass "92" on the setting.

Pressing the MENU button again will put you in the "PUSH TO CLEAR MAX

VALUES" function screen. To clear the historical peak values, press the MODIFY

(top) button once. NOTE: The historical peak memory is constantly working so

when you clear values and scroll through the screens again, the "MAX" may not be

zero (0).

Pressing the MENU (bottom) button will now put you in the "BRIGHTNESS" function

screen.

There is four (4) different levels of brightness to choose from and by

pressing the MODIFY (top) button, it will cycle through the settings "1" through "4",

and then jump back to "1" again.

Pressing the MENU (bottom) button will bring you to the "DISPLAY OFF" function

screen. When you enter this screen a countdown will begin from "9" until it reaches

"0", then the display will shut off. While in this sleep mode, the screen will still

display any alarms that occur. To bypass this function or to bring the display out of

the sleep mode, press the MENU button and you will be back at the main screen.

NOTE: It is not recommended to make any screen selections or setting changes

while driving. Doing so could take your attention away from the road, or, may

interfere with your steering or driving ability, which could cause an accident, serious

injury or death.

Maintenance & Troubleshooting

NOTE: The display used in the X Monitor when exposed to sunlight or other strong

light sources will cause the numbers on the display to not be clearly readable. This

condition, commonly referred to as "wash out" is a natural characteristic of vacuum

florescent display.

Following the diagrams in this manual, tracing hoses and wiring, checking continuity

through electric components or checking for any lines that are disconnected, should

solve any problems that may arise.

BD Engine Brake Inc

A10 – 33733 King Rd, Abbotsford, BC, Canada V2S 7M9

Ship: 88 – 446 Harrison St, Sumas, WA 98295

Mail: PO Box 231, Sumas, WA 98295

Ph: 604.853.6096 Fax: 604.853.8749 Internet: www.bd-power.com