Bosch 800 Series Manual de instalación - Página 12

Install Burner Grates

Properly position and install each burner grate as shown

in the illustration below.

30" 4 Burner

30" 5 Burner

36" 5 Burner

WARNING

To prevent flare-ups, properly support pots and

avoid spills, all grates must be properly positioned

on the cooktop whenever the cooktop is in use.

Each of the four feet must be placed into the

corresponding dimples in the cooktop. Do not use a

grate if the rubber feet are missing or damaged.

For replacement of rubber feet: Call Customer Support

at 1-800-944-2904.

Place each correct sized burner cap in its seated,

notched position and check the operation of the electric

igniters. Check flame characteristics. Flame should be

blue with a minimal yellow tip on the outer cone of the

flames.

Checking Flame Characteristics

Yellow Flames:

Further adjustment is

required.

Yellow Tips on Outer

Cones:

Normal for LP Gas

Soft Blue Flames:

Normal for Natural Gas

Note: If the flame is completely or mostly yellow, verify

that the regulator is set for the correct fuel. After

adjustment, retest.

Some yellow streaking is normal during the initial start-

up. Allow unit to operate 4-5 minutes and re-evaluate

before making adjustments.