Bosch 800 Series Manual de instalación - Página 23

Conversion to natural gas

This appliance is shipped from the factory for use with

natural gas. If the appliance has been converted to

propane gas before, you have to convert it to natural gas

again.

Check the orifices for the right nozzles and, if required,

replace them. See "Replacing the main control nozzles".

Customer Service

Contact our Customer Service if your appliance needs

repair. Our Customer Service (see below) will be happy

to supply you with details how to obtain a service repair.

Please find the contact data of all countries in the

enclosed customer service list.

To schedule a service visit and product advice

800 944 2904

toll-free

To obtain warranty service for your Product, you should

contact Bosch Customer Service at 1-800-944-2904 to

schedule a repair.

Model (E) number and FD number

When you contact our service, please have the Model

(E) number and the FD number for your appliance

available.

You can find this information on the rating label

on the back side of the appliance

▯

on the underside of the projecting control panel

▯

Questions? Please contact us. We look forward to

hearing from you.

Adjust the minimum gas flow. See "Setting the minimum

gas flow". The optimum setting is achieved when the

height of the small flame is approx. 1/8" (3 to 4 mm).

Set the pressure regulator for natural gas. Turn the

spring plate the other way around as shown in "Setting

the pressure regulator for propane gas".

Save the orifices removed from the appliance for future

use.