Bosch 800 Series Manual de uso y mantenimiento - Página 22

Imprimir página

Bosch 800 Series Manual de uso y mantenimiento

Note:

•

The temperature range in Sabbath Mode is 100° F to

450° F.

•

The Sabbath Mode timer can be set between 0:01 and

74 hours.

To edit the Sabbath Temperature:

While editing the temperature in Sabbath mode, there is no

feedback from the control. If an invalid temperature is set,

the oven will default back to the previous running

temperature.

1. Press the Bake touchpad.

2. Enter the new desired set temperature.

3. Press Enter.

The oven will adjust its set temperature after a randomized

delay.

Panel Lock

Allows the user to disable all buttons on the control panel.

Panel Lock can only be enabled in stand by mode.

1. To enable Panel Lock, press and hold the Panel Lock

touchpad for 3 seconds (in stand by mode).

2. To disable Panel Lock, press and hold the Panel Lock

touchpad for 3 seconds. The display returns to stand

by mode.

English 19

Settings

The oven settings menu is used to customize certain

oven settings.

The oven must be in Stand by mode (no cooking mode or

timer running) in order to access the setup menu.

To make changes to Settings Menu Items:

1. Press the Settings touchpad.

2. The first setup item is displayed. The display shows

"SET CLOCK". Press Settings again to access the

settings menu.

3. To display a different setup item, press the number

corresponding to that setting (see following table or

press the Settings touchpad to cycle through available

options).

4. To change the value for the displayed setting press the

Enter touchpad to enter the edit mode. Use the

numeric keypad to change the setting value. The

corresponding setting value is shown in the following

table.

For the temperature offset, with the item in edit mode,

press "-" or "+" first, then the numeric offset value.

The new value is automatically accepted as the display

reverts from edit mode back to display mode.

To exit the Settings menu:

Press the Clear On/Off touchpad.

Oven Temperature Offset

The oven is calibrated to provide accurate results. This

feature is useful if you prefer your foods lighter or darker.

When an offset temperature is selected, the actual oven

temperature is raised or lowered by this value.

The oven must be turned off in order to set an offset value.

Refer to "Temperature Offset" in "Settings Menu Options"

for setting.