Bosch 800 Series Manual de instrucciones de instalación - Página 11

Imprimir página

Bosch 800 Series Manual de instrucciones de instalación

Installation of Rubber Drain Hose Adaptor

For a large port, use the drain hose as it is.

1. For a small port, insert the rubber drain hose adaptor

into the drain hose end.

2. Obtain the Rubber Drain Hose Adaptor (J) spring

clamp from the Dishwasher Installation Kit (do not

substitute).

3. Insert the dishwasher drain hose into the end of the

drain hose (see Figure 13.) Be sure to fully insert

the drain hose.

4. Use the clamp provided to attach the Rubber Drain Hose

Adaptor to the house plumbing as shown in Figure 14.

Figure 13

Figure 14

Installation of Mounting Brackets

Before installing the supplied countertop mounting

brackets, decide which method of securing the

dishwasher into its enclosure will be used. Once the

mounting brackets are installed on the dishwasher,

removing them is difficult and will damage the

mounting brackets and the dishwasher.

The dishwasher can be secured into its enclosure in 2 ways:

NOTE: If your dishwasher opening width measures >18"

(458 mm) use the TOP MOUNT mounting methods. If your

dishwasher opening width measures 18" (458 mm) use

the SIDE MOUNT mounting method.

Top Mount is used for countertops made of wood or other

materials that can be easily drilled, or for openings

wider than 18". Orient the mounting brackets as shown

in Figure 15 and position the two small tabs on

the mounting

the dishwasher's front corners. Push the mounting

brackets down firmly to insert the tabs into the slots.

Side Mount is for countertops made of marble,

granite, or other very hard materials that cannot be

easily drilled. Also, it is for for openings that are 18".

Insert a side mount force distributor (M) in each

side as shown in Figure 16.

Torx T 20

brackets

over

the

two

Figure 15

Top Mount

Figure 16

Side Mount

slots