Bosch Benchmark Series Manual de servicio - Página 11
Navegue en línea o descargue pdf Manual de servicio para Horno Bosch Benchmark Series. Bosch Benchmark Series 45 páginas. Built-in wall ovens
También para Bosch Benchmark Series: Manual de servicio (36 páginas), Manual de instalación (32 páginas), Manual de consulta rápida (4 páginas), Manual de instrucciones de instalación (40 páginas), Manual de inicio rápido y seguridad (13 páginas)
Imprimir página
58300000181895 ARA EN A
Table 4 Element duty cycles during Fast Preheat
Table 5 Element duty cycles during Regulate
4.2.3
Setting Temperature Offsets
In some cases, it may be necessary to adjust the oven temperature if
the customer reports that food is consistently under- or over-cooked,
even though the oven is operating normally. Temperature Offsets can
Copyright by BSH Home Appliances Corporation
This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
JUNE 2014
be entered by the customer from the Settings menu to raise or lower
the cavity temperature during operation in Bake, Roast, Convection
Bake, Convection Roast, and Convection Multi-rack modes. The
allowable Offset range is from 0°F to +/- 35°F (or 0°C to +/-19°C).
After accessing the Settings menu, the soft keys beneath the display
are used for navigation and editing.
Figure 5 Touch panel / Display
1. Press Settings to access the Settings menu (from stand-by mode
only)
2. Scroll through the list of menu items using the center soft key, until
8 Temperature Offset is highlighted.
3. Press the soft key labeled Enter to edit the current setting.
4. Press (-) or (+) then enter the numeric value of the offset.
5. Press the soft key labeled Enter to save the current setting.
(Valid offset values are saved when the display changes from edit
mode back to display mode.)
6. Press Oven Clear/Off to exit the Settings menu.
Example: A +25° offset will result in a cavity temperature of 350°
when the cooking temperature is set to 325° for any of the cooking
modes affected by the Offset. Similarly, a -25° offset will result in a
cavity temperature of 300° when the cooking temperature is set to
325°.
For double ovens, a temperature offset may be set for each oven.
1901 Main St ▪ Suite 600 ▪ Irvine, CA 92614
Service Manual for Bosch Benchmark Series Built-in Wall Ovens
Page 11 of 45
800 944-2904