Bosch CBG675B 1B Series Manual de instrucciones - Página 25

Navegue en línea o descargue pdf Manual de instrucciones para Horno Bosch CBG675B 1B Series. Bosch CBG675B 1B Series 48 páginas.

Bosch CBG675B 1B Series Manual de instrucciones
Press the front panel at the bottom until it clicks
5.
audibly into place (figure
Open the appliance door again slightly and remove
6.
the tea towel.
Screw both screws back in on the left and right.
7.
Put the cover back in place and press on it until it
8.
clicks audibly into place (figure
Close the appliance door.
9.
Fault
The appliance does not work.
"Sprache Deutsch" appears on the
display.
The time does not appear when the
appliance is switched off.
The appliance door cannot be
opened.
The appliance door cannot be
opened; the n symbol lights up on
the display.
The appliance does not heat up; the
m symbol lights up on the display.
The rotary selector has fallen out of
the support in the control panel.
The rotary selector can no longer be
turned easily.
--------
:
Warning
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
Error messages on the display
When an error message appears on the display with "D"
or "E", e.g. D0111 or E0111, switch the appliance off
and on again using the ÿ On/Off button.
).
%
).
&
Possible cause
Faulty fuse.
Power cut
Power cut
Basic setting is changed.
The appliance door is locked
with the childproof lock.
The appliance door is locked
due to the cleaning function.
Demo mode is activated in the
basic settings.
The rotary selector has been
accidentally disengaged.
There is dirt under the rotary
selector.
Caution!
Do not use the cooking compartment again until the
panels have been correctly fitted.

3Trouble shooting

If a fault occurs, there is often a simple explanation.
T r o u b l e s h o o t i n g
Before calling the after-sales service, please refer to the
fault table and attempt to correct the fault yourself.

Rectifying faults yourself

You can often easily rectify technical faults on the
appliance yourself.
If a dish does not turn out exactly as you wanted, you
Notes/remedy
Check the circuit breaker in the fuse box.
Check whether the kitchen light or other kitchen appliances are working.
Reset the language and the time.
Change the basic setting for the clock display.
Deactivate the childproof lock by pressing the D field for approx. 4 seconds.
The lock can be switched off in the basic settings.
Wait until the cooking compartment has cooled and the n symbol goes out.
Briefly disconnect the appliance from the mains (switch off the circuit breaker
in the fuse box) and then deactivate demo mode in the basic settings within
3 minutes.
The rotary selector can be removed. Simply place the rotary selector back in
its support in the control panel and push it in so that it engages and can be
turned as usual.
The rotary selector can be removed. To disengage the rotary selector, simply
remove it from the support. Alternatively, press on the outer edge of the rotary
selector so that it tips and can be picked up easily.
Carefully clean the rotary selector and its support on the appliance using a
cloth and soapy water. Dry with a soft cloth. Do not use any sharp or abrasive
materials. Do not soak or clean in the dishwasher.
Do not remove the rotary selector too often so that the support
remains stable.
If it was a one-off error, the display goes out. If the error
message appears again, call the after-sales service and
quote the exact error message.

Maximum operating time

If you do not change the settings on your appliance for
several hours, the appliance stops heating up
automatically. This prevents unwanted continuous
operation.
The respective settings for the operating mode govern
when the maximum operating time is reached.
Trouble shooting en
25