Alemlube 600A Manual técnico del propietario
Navegue en línea o descargue pdf Manual técnico del propietario para Herramientas Alemlube 600A. Alemlube 600A 2 páginas. Lever action grease gun
También para Alemlube 600A: Instrucciones de servicio (2 páginas), Manual del usuario (2 páginas)
Imprimir página
Description
The 600A manufactured in Germany, is a lever action 450g grease gun capable of generating up to 12,000 psi. It
comes standard with a 16.5cm rigid extension & 4 jaw coupler for lubricating points. It has a 600g bulk grease capacity
& comes with 4 year warranty.
Specifications
Uses
Pressure Capabilities
Delivery
Operating Instructions
There are two ways to fill the gun with grease:
A: 450g Grease Cartridge:
Unscrew the grease barrel from the gun and insert the 450g grease
cartridge by holding the barrel assembly and pulling the rod back. Remove
cap from the grease cartridge, insert the cartridge into the barrel and then
rescrew the barrel assembly back onto the gun so that the cartridge sits well
against the follower cup. Once in position, press the clamp down & push the
rod firmly back into the barrel.
Important To Note:
When using the gun with a cartridge, the follower cup must be folded back.
The gun is supplied standard with the follower cup in this position.
B: Bulk Grease Loading:
Unscrew the grease barrel from the gun head & insert the barrel into the
bulk grease. Suck the grease up into the barrel by pulling the rod all the way
back. When barrel is full with grease, rescrew the barrel assembly back onto
the gun head so that the follower sits well against the grease. Press the
clamp down & push the rod firmly back into the barrel.
Important To Note:
When using the gun with bulk grease, the follower cup must be folded
forward. To do this, take the follower cup and rod assembly out of the
barrel, fold the follower cup forward and reassemble the barrel assembly.
Maintenance
Cleaning: always keep the follower cup free of impurities. Your grease
should be clear of any foreign particles, dirt etc and the gun should be
checked and cleaned regularly.
Trouble Shooting
Air Pocked In Grease: If the gun is pumped but no grease appears from the coupler:
1: Depress the air bleeder valve on the head and pump a few strokes.
Unscrew the barrel assembly from the gun head with two or three turns and then push on the plunger rod. With the
follower cup engaged the follower cup will move further down into the barrel venting any trapped air out through the
thread connections between the barrel and head. Unscrew the rigid extension as well.
NSW
QLD/PNG
TEL: (02) 9677 1555
TEL: (07) 3204 9166
FAX: (02) 9675 1155
FAX: (07) 3204 1224
OWNER'S TECHNICAL MANUAL
Lever Action Grease Gun
450g Grease Cartridges, Suction loading, Bulk loader pump from bulk grease drum.
Up to 12,000psi grease pressure
1.6g per stroke
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
Visit our website at
www.alemlube.com.au
WA
SA/NT
TEL: (08) 9302 4199
TEL: (08) 8241 7111
FAX: (08) 9303 2095
FAX: (08) 8241 7011
or
www.alemlube.co.nz
600A
NZ
TEL: (09) 447 1007
FAX: (09) 447 1008