Bosch CMG633B 1M Series Manual del usuario e instrucciones de instalación - Página 13
Navegue en línea o descargue pdf Manual del usuario e instrucciones de instalación para Horno Bosch CMG633B 1M Series. Bosch CMG633B 1M Series 40 páginas.
Imprimir página
Wipe the smooth surfaces in the cooking compart-
2.
ment with a soft, damp cloth.
Press
to switch the appliance on.
3.
Apply the following settings:
4.
Type of heating
Temperature
Cooking time
→ "Basic operation", Page 13
Press to start.
5.
8 Basic operation
8.1 Switching on the appliance
Press
to switch the appliance on.
▶
a The Bosch logo appears in the display. The types of
heating then appear.
8.2 Switching off the appliance
Switch your appliance off when you are not using it.
The appliance will switch itself off automatically if it is
not used for a certain period of time.
Press
to switch the appliance off.
▶
a The appliance switches off. Any functions currently
in progress are cancelled.
a The time or residual heat indicator appears in the
display.
8.3 Starting operation
You must start each operation.
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120 °C, this will damage the enamel.
Do not use the appliance if there is water on the
▶
cooking compartment floor.
Wipe away any water on the cooking compartment
▶
floor before operation.
Press to start.
▶
a The settings, the running time, the display ring and
the heating line appear in the display.
8.4 Pausing or cancelling operation
You can briefly pause operation and then continue. If
you cancel operation completely, the settings will be re-
set.
To pause operation briefly:
1.
Briefly press .
‒
To continue operation, press .
‒
To cancel operation completely, press and hold
2.
for approx. 3 seconds.
a Operation will stop and all the settings will be reset.
4D hot air
Maximum
1 hour
Keep the kitchen ventilated while the appliance is
‒
heating.
a Once the time has elapsed, an audible signal
sounds and the display shows the time as zero.
Press
to switch the appliance off.
6.
Once the appliance has cooled down, clean the
7.
smooth surfaces in the cooking compartment with
soapy water and a dish cloth.
Clean the accessories thoroughly using soapy water
8.
and a dish cloth or soft brush.
8.5 Setting the operating mode
Once you have switched on the appliance, it suggests
an operating mode, e.g. types of heating.
If you want to use a different operating mode to the
1.
one suggested, press the relevant touch field.
a The touch field lights up red.
→ "Operating modes", Page 10
To implement other settings, press the relevant
2.
touch fields.
Use the control ring to change the values.
3.
Press to start.
4.
8.6 Setting the type of heating and
temperature
Requirement: The operating mode "Types of
heating" has been selected.
Use the control ring to set the required type of heat-
1.
ing.
Press
.
2.
a The temperature is highlighted in white.
Use the control ring to set the temperature.
3.
Press to start.
4.
a The appliance starts heating.
a The target temperature, the time and how long the
appliance has already been in operation are shown
in the display.
When the food is ready, press
5.
ance off.
Tip: The most suitable type of heating for your food
can be found in the description of the type of heating.
→ "Types of heating", Page 10
Note: You can also set a cooking time and end time on
the appliance.
→ "Time-setting options", Page 14
Changing the type of heating
When you change the type of heating, the other set-
tings will also be reset.
1.
Press to pause operation.
Press
.
2.
a The first type of heating appears in the display with
the corresponding default temperature.
Use the control ring to change the type of heating.
3.
Changing the temperature
Once operation has started, you can change the tem-
perature directly.
Basic operation en
to switch the appli-
13