Bosch CMG636B 2I Series Manual del usuario - Página 15
Navegue en línea o descargue pdf Manual del usuario para Horno Bosch CMG636B 2I Series. Bosch CMG636B 2I Series 44 páginas.
![Bosch CMG636B 2I Series Manual del usuario](/uploads/products/server2/1377846/1377846.png)
10 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
10.1 Overview of the time-setting options
You can set a cooking time and end time for the opera-
tion. The timer can be set independently of the appli-
ance when it is in operation.
Time-setting
Use
option
Timer
The timer can be set independently
of the appliance when it is in opera-
tion. It does not affect the appliance.
Cooking time
If you set a cooking time for the op-
eration, operation of the appliance
stops automatically once this time
has elapsed.
End
For the cooking time, you can set the
time at which operation ends. The
appliance starts up automatically so
that it finishes cooking at the re-
quired time.
10.2 Setting the timer
The timer runs independently of the appliance when it
is in operation. The timer can be set when the appli-
ance is switched on or off, up to 23 hours and 59
minutes. The timer has its own audible signal so that
you can tell whether it is the timer or a cooking time
which has elapsed.
Press .
1.
a The symbol lights up red.
Use the control ring to set the timer duration.
2.
Press
to start the timer.
3.
The timer starts automatically after a few seconds.
a The timer counts down.
a When the appliance is switched off, you will still be
able to see the timer counting down in the display.
a When the appliance is switched on, the display
shows the settings for the current operation. To dis-
play the timer for a few seconds, press .
a An audible signal sounds once the timer duration
has elapsed. The red symbol goes out.
Once the timer duration has elapsed:
4.
To stop the signal early, press any touch field.
‒
To set another timer, press
‒
ring to set the time.
Changing the timer
You can change the timer duration at any time.
Press .
1.
2.
Use the control ring to change the duration of the
timer.
Press
to confirm.
3.
Cancelling the timer
You can cancel the timer duration at any time.
Press .
1.
Use the control ring to reset the duration of the
2.
timer to zero.
and use the control
Press
to confirm.
3.
a The red symbol goes out.
10.3 Setting the cooking time
You can set a cooking time for operation of up to 23
hours 59 minutes.
Requirement: An operating mode and temperature or
setting have been set.
Press "Cooking time".
1.
Use the control ring to set the cooking time.
2.
Direction of rotation
Left
Right
The cooking time can be set in one-minute incre-
ments up to one hour, and then in five-minute incre-
ments. The end time is calculated automatically.
Press
to start.
3.
a The appliance starts to heat and the cooking time
counts down.
a When the time has elapsed, a signal sounds. The
time shown in the display is zero.
When the cooking time has elapsed:
4.
To stop the signal early, press any touch field.
‒
To set another cooking time, press "Cooking
‒
time" and use the control ring to set the time.
To continue without setting a cooking time, press
‒
to start.
When the food is ready, press
‒
appliance off.
Changing the cooking time
You can change the cooking time at any time.
Press.
1.
Use the control ring to change the cooking time.
2.
a The change is applied immediately.
Cancelling the cooking time
You can cancel the cooking time at any time.
Press "Cooking time".
1.
Use the control ring to reset the cooking time to
2.
zero.
a The change is applied immediately.
a The appliance continues to operate without a cook-
ing time.
10.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡ In order to achieve a good cooking result, do not
delay the end time once the appliance is already in
operation.
¡ Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡ An operating mode and temperature or setting have
been set.
¡ A cooking time is set.
Time-setting options en
Default value
10 minutes
30 minutes
to switch the
15