Bosch CMG7241 1 Series Manual del usuario - Página 39

Navegue en línea o descargue pdf Manual del usuario para Horno Bosch CMG7241 1 Series. Bosch CMG7241 1 Series 44 páginas.

Imprimir página

Hob type

Induction hob

Full-surface induction hob

Gas hob

Electric hob

Observe different national installation instructions for the hob.

27.5 Installation in a tall unit

Observe the installation dimensions and the installation

instructions when installing in a tall unit.

¡ To ventilate the appliance, the intermediate floors

must have a ventilation cut-out.

¡ In order to ensure sufficient ventilation of the appli-

ance, there must be a ventilation opening of at least.

200 cm² in the base area. To do this, trim the base

panel or fit a ventilation grille. Ensure that the air ex-

change is guaranteed in accordance with the dia-

gram.

¡ If the tall unit has another back panel in addition to

the element back panels, this must be removed.

¡ Only fit the appliance up to a height which allows

accessories to be easily removed.

a raised in mm

a flush in mm

27.6 Corner installation

Observe the installation dimensions and the installation

instructions when installing in a corner.

¡ To ensure that the appliance door can be opened,

you must take the minimum dimensions into consid-

eration when installing in a corner. The dimension

is dependent on the thickness of the unit front and

the handle.

27.7 Electrical connection

In order to safely connect the appliance to the elec-

trical system, follow these instructions.

¡ The appliance corresponds to protection class I and

must only be operated with a protective earth con-

nection.

¡ The fuse protection must correspond to the power

rating specified on the appliance's rating plate and

to the local regulations.

¡ The appliance must be disconnected from the

power supply whenever installation work is being

carried out.

¡ The appliance must only be connected using the

power cable provided.

¡ The power cable must be plugged in at the rear of

the appliance until you hear a clicking sound. A 3 m

power cable can be obtained from the after-sales

service.

¡ The power cable must only be replaced with a cable

from the original manufacturer. This is available from

after-sales service.

¡ Contact protection must be guaranteed by the in-

stallation.

¡ If the display on the appliance remains dark, it has

not been connected correctly. Disconnect the appli-

ance from the mains and check the connection.

Electrically connect the appliance with the

protective contact plug

Note: The appliance must only be connected to a pro-

tective contact socket that has been correctly installed.

Insert the plug into the protective contact socket.

▶

Installation instructions en

b in mm