Alemlube EL SERIES Manual técnico del propietario - Página 9

Navegue en línea o descargue pdf Manual técnico del propietario para Herramientas Alemlube EL SERIES. Alemlube EL SERIES 11 páginas. Oil pump
También para Alemlube EL SERIES: Instrucciones de servicio (3 páginas), Manual técnico del propietario (4 páginas), Manual técnico del propietario (6 páginas), Instrucciones de servicio (2 páginas), Instrucciones de servicio (2 páginas), Manual técnico del propietario (4 páginas), Manual técnico del propietario (2 páginas), Manual técnico del propietario (4 páginas), Manual técnico del propietario (5 páginas), Manual del usuario (4 páginas), Manual de instrucciones (17 páginas)

Imprimir página
Alemlube EL SERIES Manual técnico del propietario
O300130 Grease Control Valve
Read the safety warnings and instructions in this manual carefully, before installation and start-up of the control
handle. It is the responsibility of the purchaser to retain this manual for future reference. Failure to comply with
the recommendations stated in this manual may damage the control handle and void factory warranty.
Airborne particles and loud noise hazards.
Wear ear and eye protection.
Before doing any maintenance on the control handle, be certain all pressure is completely vented from the pump,
suction, discharge, piping, and all other openings and connections.
Be certain the air supply is locked out or made non-operational, so that it cannot be started while work is being
done on the control handle. Be certain that approved eye protection and protective clothing are worn at all times
in the vicinity of the control handle.
Failure to follow these recommendations may result in serious injury or death.
CAUTION
Maximum fluid pressure is 5,800psi (400bar).
Under no circumstances should the control handle be aimed at any person. Personal injury may result.

Product Description

The control handles are used for dispensing automotive lubricants.

Operation

1. Connect the control handle to the lubricant supply line
(1/4 quick plug thread required).
2. Open the manual tip.
3. Squeeze control handle trigger.
When the required amount of product
has been dispensed, release
the trigger to stop delivery.
Close the manual tip.
Trouble Shooting
1. If lubricant leaks around inlet and threads,
apply thread sealant to tighten threads.
NSW/ACT
QLD/PNG
TEL: (02) 9939 0711
TEL: (07) 3889 8480
FAX: (02) 9939 0411
FAX: (07) 3889 8490
OWNER'S TECHNICAL MANUAL
20KG Grease Kit
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
Visit our website at
www.alemlube.com.au
WA
SA/NT
TEL: (08) 9209 3066
TEL: (08) 8241 7111
FAX: (08) 9209 3933
FAX: (08) 8241 7011
or
www.alemlube.co.nz
G100120
NZ
TEL: (09) 447 1007
FAX: (09) 447 1008
9