Bosch HBA13B2 2A Series Manual de instrucciones - Página 11

Navegue en línea o descargue pdf Manual de instrucciones para Horno Bosch HBA13B2 2A Series. Bosch HBA13B2 2A Series 24 páginas.

Imprimir página

Clock

After the appliance is connected or following a power cut, the

symbol and four zeros flash in the display. Set the clock.

Press the

button.

The clock in the display shows 12:00. The time symbols light

up and the brackets are around

Use the

button to set the clock.

After a few seconds, the time that has been set is adopted.

Childproof lock

The oven has a childproof lock to prevent children switching it

on accidentally.

The oven will not react to any settings. The timer and clock can

also be set when the childproof lock has been activated.

If the type of heating and temperature or grill setting have been

set, the childproof lock interrupts the heating.

Activating the childproof lock

No cooking time or end time should have been set.

Changing the basic settings

Your oven has various basic settings. These settings can be

customised to suit your requirements.

Basic setting

Selection 1 Selection 2 Selection 3

c1 Clock display

always*

c2 Signal duration

approx.

upon completion of

10 seconds

a cooking time or

timer period

c3 Waiting time until a

approx.

setting is applied

2 seconds

* Factory setting

Care and cleaning

With good care and cleaning, your oven will remain clean and

fully-functioning for a long time to come. Here we will explain

how to maintain and clean your oven correctly.

Notes

Slight differences in the colours on the front of the oven are

■

caused by the use of different materials, such as glass,

plastic and metal.

Shadows on the door panel which look like streaks, are

■

caused by reflections made by the oven light.

Enamel is baked on at very high temperatures. This can

■

cause some slight colour variations. This is normal and does

not affect their function. The edges of thin trays cannot be

completely enamelled. As a result, these edges can be

rough. This will not impair the anti-corrosion protection.

only with

the

but-

ton

approx.

2 minutes*

5 minutes

approx.

5 seconds*

10 seconds

Changing the clock

No other time-setting option should have been set.

Press the

button four times.

The time symbols light up in the display and the brackets are

around

Use the

button to change the clock.

After a few seconds, the time that has been set is adopted.

Hiding the clock

You can hide the clock. For more information, please refer to

the section Changing the basic settings.

Press and hold the

button for approx. four seconds.

The

symbol appears in the display. The childproof lock is

activated.

Deactivating the childproof lock

Press and hold the

button for approx. four seconds.

The

symbol goes out in the display. The childproof lock is

deactivated.

No other time-setting option should have been set.

Press and hold the

button for approx. 4 seconds.

The current basic setting for the clock display is shown in the

display, e.g. c1 1 for selection 1.

Use the

button to change the basic setting.

Confirm by pressing the

The next basic setting appears in the display. You can scroll

through all levels with the

with the

button.

To finish, press and hold the

All basic settings are applied.

You may change the basic settings at any time.

Cleaning agents

To ensure that the different surfaces are not damaged by using

the wrong cleaning agent, observe the information in the table.

Do not use

sharp or abrasive cleaning agents,

■

cleaning agents with a high concentration of alcohol,

■

hard scouring pads or sponges,

■

high-pressure cleaners or steam cleaners.

■

Wash new sponge cloths thoroughly before use.

button.

button and change the setting

button for approx. 4 seconds.