Electrolux EW 1050 F Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Lavadora Electrolux EW 1050 F. Electrolux EW 1050 F 24 páginas. Electrolux washing machines

Imprimir página

before you press the START PAUSE button.

If you have already pressed the START PAUSE

button, and you wish to cancel the delay time,

proceed as follows:

• set the washing machine to PAUSE by pressing the

START PAUSE button;

• press the DELAY button once, the light relevant to

the selected delay goes off;

• press the START PAUSE button again to start the

programme.

Important!

The selected delay can be changed only after

selecting the washing programme again.

The door will be locked throughout the delay time

(DOOR LOCKED light lit).

If you need to open the door, you must first set

the washing machine to PAUSE by pressing the

START PAUSE button. After aprox. 2 minutes the

DOOR LOCKED light on the porthole goes off

and the door can be opened.

After you have closed the door, press the START

PAUSE button again.

The delay start can not be selected with SPIN

and DRAIN programmes.

7 Programme progress display

When you choose the delayed start, the light

relevant to the selected delay lights up.

After the machine has started, the remaining time is

shown by the corresponding indicator light.

At the beginning of the programme, only the

WASHING light stays on. When the programme has

finished, the END pilot light comes on.

The END light flashes in the event of operating

problems :

4 flashes: door open

2 flashes: problem with water draining

1 flash: problem with water supply

For more information see paragraph "Trouble

shooting guide".

8 Temperature selector dial (thermostat)

To select the washing temperature turn the dial to

the required value.

When your laundry is only lightly soiled, a cold wash

can be used (dial to position

9 Programme selector dial

The selector dial is divided into 5 sections:

• Cotton

• Synthetic

• Delicate

• Wool

• Special (special programmes)

• Position O

The selector dial can be turned either clockwise or

anticlockwise.

Position

corresponds to the ENERGY SAVING

programme for cotton and position O to Reset

programme/Switching OFF of the machine.

At the end of the programme the selector dial

must be turned to position O, to switch the

machine off.

ATTENTION!

If you turn the programme selector dial to another

programme when the machine is working, the lights

of the programme progress display start to flash. The

machine will not perform the new selected

programme.

(hand washing)