Electrolux EW 1078 F Manual de instrucciones - Página 13
Navegue en línea o descargue pdf Manual de instrucciones para Lavadora Electrolux EW 1078 F. Electrolux EW 1078 F 26 páginas.
También para Electrolux EW 1078 F: Manual de instrucciones (24 páginas)
Imprimir página
13 START/PAUSE button
This button has three functions:
Start - Pause - Draining of water.
Start
After having selected the required programme, press
this button to start the machine; the corresponding
pilot light stops flashing.
If you have selected the delayed start, the machine
begins its countdown. The duration of the
programme or the delay appears on the display.
Pause
To interrupt a programme which is running, depress
the Start/Pause button: the corresponding pilot light
starts to flash.
To restart the programme from the point at which it
was interrupted, press the START/PAUSE button
again.
Draining of water
By depressing the Start/Pause button
• The water of programme "A" (Soak) is emptied out
• The water of the last rinse on programmes with
Anti-crease
option is emptied out and the
laundry is spun.
Important!
By depressing simultaneously START/PAUSE
and BIO button the buzzer is switched off.
14 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on. When the programme has
finished, the End
pilot light comes on.
If the pilot light
flashes at the end of the
programme this means that the drain filter is
clogged.
In the event of operating problems one of the
following lights and the END light
the same time an alarm code is displayed:
E10+
: the machine does not fill
G
G
E20+
: the machine does not empty
E40+
: the door is open
G
To eliminate the problem see paragraph "Something not
working".
Functions
Pilot lights
Depending on the programme, different functions
can be combined.
When the relevant buttons are pressed, the
corresponding pilot lights come on.
When they are pressed again, the pilot lights go out.
If an incorrect option is selected, the pilot light
flashes for about 2 seconds and the message Err is
displayed and 3 acoustic signals ring.
13
start to flash; at