AirStage UTY-DCGY Manual de instalación - Página 2
Navegue en línea o descargue pdf Manual de instalación para Controlador AirStage UTY-DCGY. AirStage UTY-DCGY 11 páginas. Central remote controller
También para AirStage UTY-DCGY: Manual de instalación (9 páginas)
Imprimir páginaINSTALLATION MANUAL
CENTRAL REMOTE CONTROLLER
Contents
1.
SAFETY PRECAUTIONS ...................................................... 1
2.
MAIN UNIT AND ACCESSORIES .......................................... 1
3.
ElECTRICAl REqUIREMENT ............................................. 2
4.
SElECTING AN INSTAllATION lOCATION ........................... 2
4. 1.
Dimensions ............................................................ 2
4. 2.
Installation restrictions ............................................. 3
5.
WIRING RUlES .................................................................. 3
5. 1.
Terminal names ...................................................... 3
5. 2.
Wiring rules ............................................................ 3
6.
INSTAllATION METHOD ................................................... 5
6. 1.
Selecting the Method of Installation .............................. 5
6. 2.
Preparing Installation ................................................ 5
6. 3.
DIP Switch Setting ................................................... 6
6. 4.
Installation Method - Integrated type ........................... 6
6. 5.
Installation Method - Separate type .............................. 7
6. 6.
External Input/Output function .................................... 9
7.
TURNING ON THE POWER ............................................. 10
11
SAFETY PRECAUTIONS
▪
The "SAFETY PRECAUTIONS" indicated in the manual
contain important information pertaining to your safety.
Be sure to observe them.
▪
For details of the operation method, refer to the operat-
ing manual.
▪
Request the user to keep the manual on hand for future
use, such as for relocating or repairing the unit.
This mark indicates procedures
which, if improperly performed,
WARNING
might lead to the death or serious
injury of the user.
Perform electrical work by an authorized service
personnel in accordance with the installation manual
and the electrical wiring regulations or implementation
regulations of the country. Also do not install this unit
by yourself. Improper electric work will cause electric
shock or a fire.
Perform installation work in accordance with the instal-
lation manual. Request an authorized service person-
nel to perform installation work. Do not install this unit
by yourself. Improper installation will cause injury,
electric shock, fire, etc.
In the event of a malfunction (burning smell, etc.), im-
mediately stop operation, turn off the electrical break-
er, and consult authorized service personnel.
Install a leakage circuit breaker to power supply cable
in accordance with the related laws and regulations
and electric company standards.
Use a power source exclusively for this unit. Never
share the power source with indoor unit or other elec-
trical equipment. Doing so will cause fire and electric
shock.
En-1
This mark indicates procedures
which, if improperly performed,
WARNING
might lead to the death or serious
injury of the user.
Do not install the unit in the following areas:
▪
Do not install the unit near a source of heat, steam,
or flammable gas.
▪
Area filled with mineral oil or containing a large
amount of splashed oil or steam, such as a kitchen. It
will deteriorate plastic parts, causing the parts to fail
or the unit to leak water.
▪
Area that generates substances that adversely affect
the equipment, such as sulfuric gas, chlorine gas,
acid, or alkali. It will cause the copper pipes and
brazed joints to corrode, which can cause refrigerant
leakage.
▪
Area containing equipment that generates elec-
tromagnetic interference. It will cause the control sys-
tem to malfunction, and cause erroneous operation.
▪
Area that can cause combustible gas to leak, con-
tains suspended carbon fibers or flammable dust, or
volatile inflammables such as paint thinner or gaso-
line. If gas leaks and settles around the unit, it can
cause a fire.
▪
Do not use the unit for special purposes, such as
storing food, raising animals, growing plants, or
preserving precision devices or art objects. It can de-
grade the quality of the preserved or stored objects.
▪
Install the unit in a well-ventilated place avoiding
rains and direct sunlight.
Do not operate this unit when your hands are wet.
Touching the unit with wet hands will cause an electric
shock.
When children can approach the unit or touch the unit,
take preventive measures.
This mark indicates procedures
which, if improperly performed, might
CAUTION
possibly result in personal harm to the
user, or damage to property.
Pay abundant care when transporting this unit be-
cause it is a precision device. Improper transportation
will cause trouble.
Do not touch the switches with sharp objects. Doing so
will cause injury, trouble, or electric shock.
Do not expose this unit directly to water. Doing so will
cause trouble, electric shock, or heating.
Do not set vessels containing a liquid on this unit. Do-
ing so will cause heating, fi re, or electric shock.
Dispose of the packing materials safely. Tear and
dispose of the plastic packing bags so that children
cannot play with them. There is the danger of suffoca-
tion if children play with the original plastic bags.
21
MAIN UNIT AND ACCESSORIES
The following parts are supplied. Use them as required.
Name and Shape
Q'ty
Central remote
controller
Application
Main unit
1