Drayton MiTime T721R Manual del propietario

Navegue en línea o descargue pdf Manual del propietario para Mando a distancia Drayton MiTime T721R. Drayton MiTime T721R 2 páginas. Drayton mitime t721r central heating & hot water programmer

Imprimir página
Drayton
HOMEOWNER Guide
MiTime
Programmer Series
TM
Dual Channel
Model: T721R
What is a programmer?
... an explanation for householders
Programmers allow you to set 'On' and 'Off' time
periods. Some models switch the central heating and
domestic hot water on and off at the same time, while
others allow the domestic hot water and heating to
come on and go off at different times.
Set the 'On' and 'Off' time periods to suit your own
lifestyle. On some programmers you must also set
whether you want the heating and hot water to run
Mi Tim
e
continuously, run under the chosen 'On' and 'Off'
heating periods, or be permanently off.
The time on the programmer must be correct. Some
Invensys
types have to be adjusted in spring and autumn at the
changes between Greenwich Mean Time and British
Customer Service Tel: 0845 130 5522
Summer Time.
Customer Service Fax: 0845 130 0622
You may be able to temporarily adjust the heating
Technical Helpline: 0845 130 7722
programme, for example, 'Override', 'Advance' or
Website: www.draytoncontrols.co.uk
'Boost'. These are explained in the manufacturer's
instructions.
l
@DraytonControls
The heating will not work if the room thermostat has
x
/DraytonControls
switched the heating off. Also, if you have a hot-water
cylinder, the water heating
EU Design Regs:- 002180638-1/2/3
will not work if the cylinder
User Guide 06490187001 Iss E
thermostat detects that the
hot water has reached the
correct temperature.
HOMEOWNER Guide
Step 3: Zone Details
Step 4: Prog. Timetable
→
Zone = Heating
Zone = Heating
Current mode: Auto
Link to Copy days
Options: see table below.
Timetable day range: Monday to
Link to Programme timetable
Friday (Week and weekend)
See further detail in Step 4.
Options: Individual days (7day), Week and
weekend (5/2day), All week (24hr). The
Now: describes the current status, e.g.
available blocks depend on the selection
in menu "change timetable type"
programme is On until 12:00 am. Link to
Programme timetable - see further details
in Step 4.
Help text: Use left/right buttons to
select the days you want to change
Press Select ( ) to change mode
Arrow denotes that further options are
Mode:
Description:
available if you scroll down.
Auto
The programmer will control the
On & OFF times in line with the
Period 1 settings: describes the current timetable
programmed timetable
settings, e.g. Heating has been programmed to
turn On at 6:30am and go off at 8:30am
Always Off
The selected zone will be OFF
Always On
The selected zone will be On
Period 2 settings: describes the current timetable
settings, e.g. Heating has been programmed to
All Day
The programme will control the
turn On at 4:30pm and go off at 10:30pm
(first on / last
On & OFF times in line with the
off)
programmed timetable, but using
Press select ( ) when highlighted to adjust
only the first On event and the last
settings (see Step 5)
OFF event - it will remain On in
Up to 4 periods can be programmed
between these two periods.
6444 Invensys MiSeries 2 Channel 06490187001 IssE.indd 1
Step 1: Keys and Display
Dual Channel: MiTime T721R
MiTi me
Home key: Press to go back
to the home screen at any
time
Back key: Press to return to
the previous screen
Step 5: Period Settings
→
Day range & period
Highlight shows adjustable field:
Use up/down buttons to adjust values
Period settings: On at 6:30am and Off
at 8:30am
Help text: Use left/right buttons to
change fields
Stored programmes
MiTime contains 3 pre-set programmes. An example
is shown below. These programmes can be modified
according to personal needs and can be stored by
using a name. Via this name they also can be reloaded.
Once a programme has been modified, the original
factory pre-set will no longer be available. On a
System Reset, only the current loaded programme will
be replaced with the factory setting – see Installation
Guide Step 4.
Programme 1
All week
Example:
Mon-Sun Mon-Fri
1st On
6:30am
1st Off
8:30am
2nd On
4:30pm
2nd Off
10:30pm
Date
Home screen showing
current Status and Settings
link for all zones
MiTime
Select key: Press to select highlighted
Arrow keys: Press to move
options, and to open and save editor screens
the highlight on screen, and
to change field values
This icon used
throughout these
instructions refers
to this button
Step 6: Additional User Settings
→
Feature:
Description:
Programme
On & Off times for the current period can be
Timetable
modified. See description in 'Step 4'
Copy days
Will copy the current day to one or more other days
Add Period
Adds a Time event. It will be added at the correct
position within the day. There is a maximum of 4
periods.
Remove Period
Removes the selected period. There needs to be at
least 1 period
Change
The visible day-blocks available in "programme
Timetable Type
timetable" can be defined, see Step 4
Individual days
Each day can be programmed individually
Week and
Mon... Fri and Sat... Sun can be programmed as 2
weekend
blocks
All week
Mon...Sun can be programmed as one block
Stored
MiTime contains 3 pre-set programmes. These
programmes
programmes can be modified according to personal
needs and can be stored by using a name. Via this
name they can also be re-loaded. Once a programme
has been modified, the original factory pre-set will no
longer be available unless a System Reset is applied -
see Installation Guide Step 4.
Week & Weekend
Load stored
A pre-set programme can be loaded
programme
Sat-Sun
Save current
The current programme can be saved by name (Each
6:30am
7:00am
programme
pre-set program includes: Individual days, week/
8:30am
9:00am
weekend, all day and custom day schedules)
4:30pm
4:00pm
10:30pm 11:00pm
Step 2: Home Screen
→
Zone = Heating
Current status: the programme is On
until 12:00 am
: Indicates a Service warning
Link to zone detail, see Step 3.
: Indicates that holiday
is enabled
Time
+hr key: Press from the home
or zone details screens to
add up to 3 hours to the
current period
Advance key: Press from the
home or zone details screens
to advance to the next on or
Link to Settings
off period
See further details in Step 6.
Help text to prompt for
next action. It relates to the
highlighted line
LED: Illuminates when any
zone is scheduled to be On
Press Select to enter a specific
→
Setting. Options shown below:
Factory Pre-Set:
Feature:
Description:
Help Tips
Describes the button functions
Holiday switch
In the period until holiday starts the product will operate normally. If holiday
off
is disabled manually or terminates automatically, the mode before start of
holiday will be re-instated.
An enabled holiday will be indicated with a suitcase symbol in the top line.
If holiday is active, in the Set: line the holiday end date will be indicated. In
the Summary screen the suitcase will be visible together with the holiday
temperature.
Status
Enable or disable holiday mode.
Zones
Holiday mode can be applied to a specific zone or
all zones
Holiday start
Set the time for the start of your holiday
time (From)
Default
Holiday start
Set the date for the start of your holiday
date (From)
Holiday end time
Set the time for the end of your holiday
Programme 1
(To)
Holiday end date
Set the date for the end of your holiday
(To)
Time and date settings
Set time
To set time of day
Set date
To set date
Daylight saving
To enable or disable daylight saving
Clock format
To select 12h or 24h clock mode
Zone = Hot Water
Current status: the programme is
Off until 12:00 am
Link to zone details, see Step 3.
Press Select ( ) to view or edit zone
Factory Pre-Set:
Disabled
All zones
Current time -
nearest hour
Today
Current time -
nearest hour
Today + 1 week
Factory set
Factory set
Enabled
12hr
27/09/2013 09:09