Bosch Integra HDI7282U Manual de conversión - Página 8

Navegue en línea o descargue pdf Manual de conversión para Horno Bosch Integra HDI7282U. Bosch Integra HDI7282U 32 páginas. Dual-fuel slide-in range
También para Bosch Integra HDI7282U: Manual de instrucciones de instalación (48 páginas), Manual de instrucciones de instalación (48 páginas)

Conversion

Test the Installation

Apply Leak Detection Fluid

Test Electric Ignition

Test Cooktop Burners:

English 6

1. Use a 1/2" wrench to turn orifice clockwise until it stops (2 1/2 - 3 turns).

Unlike the broil burner orifice, the bake burner orifice should be tightened as

far as it will go in order to ensure that complete conversion has occurred.

Air Shutter

Bake Orifice

Natural Gas Setting

Leak testing is to be conducted by the installer according to the instructions given

in this section.

Turn on Gas. Apply a non-corrosive leak detection fluid to all joints and fittings in

the gas connection between the shutoff valve and the range. Include gas fittings

and joints in the range if connections may have been disturbed during installation.

Bubbles appearing around fittings and connections indicate a leak.

If a leak appears, turn off supply line gas shutoff valve and tighten connections.

Retest for leaks by turning on the supply line gas shutoff valve. When leak check

is complete (no bubbles appear), test is complete. Wipe off all detection fluid resi-

due.

CAUTION: Never check for leaks with a flame.

Do not continue to the next step until all leaks are eliminated.

Turn on power at breaker

Caution: If the display flashes and beeps, the polarity of the wiring may be

reversed. Reversed polarity can damage the range and can result in electrical

shock hazard. Immediately switch off power at the breaker and return to installa-

tion instructions.

Each burner must be tested for proper lighting, proper flame characteristics on the

low setting and proper flame characteristics on the high setting.

Test for proper ignition:

Figure 2: Bake Orifice

Fully seated

LP Gas Setting

Figure 3: Bake Orifice Conversion