DrBrowns natural flow Insta-Feed AC184 Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Calentador de biberones DrBrowns natural flow Insta-Feed AC184. DrBrowns natural flow Insta-Feed AC184 15 páginas.
También para DrBrowns natural flow Insta-Feed AC184: Manual de instrucciones (9 páginas)

Imprimir página
DrBrowns natural flow Insta-Feed AC184 Manual de instrucciones
WARMING GUIDE
Bottle/Jar Type
Volume
4 oz / 120 mL
4 oz / 120 mL
Plastic
8 oz / 250 mL
8 oz / 250 mL
4 oz / 120 mL
4 oz / 120 mL
Glass
8 oz / 250 mL
8 oz / 250 mL
5 oz / 150 mL
5 oz / 150 mL
Plastic
9 oz / 270 mL
9 oz / 270 mL
5 oz / 150 mL
5 oz / 150 mL
Glass
9 oz / 270 mL
9 oz / 270 mL
4 oz / 120 mL
Glass
*Room Temp = 72
F/22
º
ºC, Refrigerator = 39ºF/4ºC
WARNING: THIS TIME CHART IS APPROXIMATE FOR DR. BROWN'S
WARMING TIMES WILL VARY DEPENDING ON THE BOTTLE VESSEL SHAPE AND VOLUME.
CAUTION: NEVER FREEZE GLASS CONTAINERS, AS GLASS MAY BREAK.
FROZEN MILK OR FOOD. ALWAYS THAW FROZEN MILK OR FOOD OVERNIGHT IN THE REFRIGERATOR
FIRST BEFORE WARMING.
5
Temperature*
Fill Line (mL)
Room Temp
8
Refrigerator
14+2
Room Temp
8
Refrigerator
14+2
Room Temp
5
Refrigerator
10
Room Temp
4
Refrigerator
7
Room Temp
14+4
Refrigerator
14+14+2
Room Temp
14+7
Refrigerator
14+14+14+4
Room Temp
8
Refrigerator
14+2
Room Temp
10
Refrigerator
14+8
Room Temp
14+2
®
BOTTLE VESSEL SIZES.
DO NOT USE THIS WARMER FOR
STERILIZING SMALL PARTS
CAUTION: Always unplug the warmer before filling.
The sterilize feature can be used for any small part safe for steam sterilization. DO NOT
sterilize bottles in this sterilizer.
1. Add 2 oz / 60 mL of DISTILLED water directly into the Warming Chamber. Do not
overfill, as overfilling may cause damage to the unit.
2. Place small parts (nipples/teats, pacifiers/soothers, etc.) to be sterilized in the
Lift-Out Basket.
3. Place the Lift-Out Basket with small parts into the Warming Chamber.
4. Place the Adapter Ring on top of the Warming Chamber.
5. Place the Sterilizing Lid on top of the Adapter Ring.
6. Plug in the power cord and press the Power Button. The Indicator Light will turn on,
indicating the sterilizing cycle has begun.
WARNING: DO NOT open Sterilizing Lid or reach over the appliance while in
use, as steam will cause burns and serious injuries. Do not touch hot surfaces
during or immediately after use.
7. When the Indicator Light turns off, the sterilizing cycle is done.
8. Allow the unit to cool for at least 10 minutes before removing the Sterilizing Lid,
Adapter Ring, and Lift-Out Basket.
CAUTION: Be sure to observe the 10-minute cooling time as warmer
parts and sterilized parts will be hot. Always remove the Sterilizing Lid
carefully by the handle. Take care when removing the Sterilizing Lid as there
may be some residual steam—keep hands and face away. Allow the steam to
clear before reaching into the unit. Always retrieve the sterilized parts by
removing the Lift-Out Basket.
1
2
4
5
7
8
10
3
6
6