Anchor AN-130U1+ Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Altavoces Anchor AN-130U1+. Anchor AN-130U1+ 6 páginas.
También para Anchor AN-130U1+: Manual del usuario (7 páginas)

Imprimir página

AN-130+ Speaker Monitor Owners Manual

Anchor Audio UHF wireless is a 16 channel, diversity wireless system that receives signals with two independent antennae. With diversity

wireless the receiver processes the stronger signal, effectively minimizing dropouts and interference from other transmitting sources. The

antennae are mounted internally so there are no obstructions or risk of damage.

CHANNEL SELECTION - BUILT-IN RECEIVER

Select a channel, set the built-in receiver & microphone transmitter

to that channel before using your wireless system.

1. Choose any available wireless channel/

2. Set the Wireless Channel Selector Knob to the channel/

If you have two wireless receivers repeat above for the second receiver.

Remember, each receiver/transmitter pair must be set to different

channels to avoid interference.

DIVERSITY WIRELESS BY ANCHOR AUDIO

frequency from 1 thru 16

(see page 5 for transmitter instructions)

frequency you choose in step 1

NOTE: If you experience ongoing interference with your wireless system, the selected frequency may be incompatible with other systems in the area.

UHF WIRELESS

VOLUME CONTROL

NOTE: Ongoing wireless interference? The frequency you selected may be in use by other systems in the area.

Change channels until you find a clear frequency.

CONTROLLING FEEDBACK

Feedback, a howling noise or shrill sound, is

self-generated by the sound system. It's caused

by a microphone picking up the sound coming

from the speaker and then re-amplifying it. Once

a feedback loop starts, it continues until the

system is adjusted.

FEEDBACK CAUSES

• Microphone too close, pointing towards

or in front of speaker

• Volume setting is too loud for room

• Sound reflecting off hard surfaces

Try different channels to find a clear frequency.

UHF WIRELESS

CHANNEL SELECTION

RX INDICATOR LIGHTS

AVOIDING & ELIMINATING FEEDBACK

• Point microphone in a different direction

• Keep microphone away from the speaker

• Place speaker in FRONT of the microphone

• Reduce the sound system volume levels

CAUTION: Feedback can damage your equipment & may

be hazardous to hearing.

MADE IN USA

SIX YEAR WARRANTY