Dreadbox Erebus Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Equipos de grabación Dreadbox Erebus. Dreadbox Erebus 8 páginas. Analog paraphonic synthesizer
También para Dreadbox Erebus: Manual del usuario (13 páginas), Manual del usuario (15 páginas), Manual de construcción (12 páginas)

Imprimir página

1. Both Oscillators Master Tune.

2. Oscillator 1 Wave selection.

Center position sets the Osc1 OFF

3. Oscillator 2 Detune.

4. Oscillator 2 Wave selection.

Center position sets the Osc2 OFF

5. Oscillator 1 Octave selector.

6. Oscillator 2 Octave selector.

7. Sets the Glide's Rate for the Osc1 (portamento)

8. Sets the Glide's Rate for the Osc2 (portamento)

9. Sets the Mix level between Osc1 and Osc2.

10. Hard syncs the Osc2 to Osc1.

When one of the Oscillators is Off (when its dedicated wave switch is in the center position), the MIX

knob will not have any effect and the Oscillator that is ON will always be added to the Filter.

2.4 Filter

The filter of the EREBUS is a 2-pole 12db/octave pre-fed resonating Low Pass

Filter. Pre-fed means that it has a build in pre-resonant accent that it is

always active on the 1/6th of the filter's total input gain and completely

independent from the normal resonance control, thus making the EREBUS a

much more aggressive and edgy synth. Resonating means that with the

resonance control at 100% you get a self-oscillation.

1. Sets the Cutoff frequency of the filter.

2. Sets the Post Resonance amount.

Adding Resonance will drastically increase the synth's output volume, due

to the nature of the Filter.

2.5 Amplifier

EREBUS's amplifier has a build-in AR envelope generator. Notice that

when the output Level is at max you get 8V/pp, so be careful not to hurt

your ears or damage your speakers.

1. Master volume

2. Attack speed

3. Release speed