Bosch 11248EVS Manual de instrucciones de uso y seguridad - Página 4
Navegue en línea o descargue pdf Manual de instrucciones de uso y seguridad para Herramienta eléctrica Bosch 11248EVS. Bosch 11248EVS 29 páginas. Bosch operating/safety instructions hammer drill 11241evs, 11248evs
También para Bosch 11248EVS: Manual de consulta rápida (25 páginas)
![Bosch 11248EVS Manual de instrucciones de uso y seguridad](/uploads/products/server2/1398350/1398350.jpg)
BM 1619929548 2/03
2/12/03
Position the cord clear of rotating bit. Do
not wrap the cord around your arm or
wrist. If cord becomes entangled with the
spinning bit it could entrap you causing
serious personal injury.
Position yourself to avoid being caught
between the tool or side handle and walls
or posts. Should the bit become bound or
jammed in the work, the reaction torque of
the tool could crush your hand or leg.
Do not strike the bit with a handheld
hammer
or
sledge
attempting to dislodge a bound or jammed
bit. Fragments of metal from the bit could
dislodge and strike you or bystanders.
Never place the tool down until the bit or
accessory have come to a complete stop.
Do not use dull or damaged bits and
accessories. Dull or damaged bits have a
greater tendency to bind in the workpiece.
When removing the bit from the tool avoid
contact with skin and use proper protective
gloves when grasping the bit or accessory.
Accessories may be hot after prolonged use.
Do not run the tool while carrying it at your
side. The spinning drill bit may become
entangled with clothing and injury may result.
12:37 PM
Page 4
When the power cord is unplugged from
the mains outlet or when branch-circuit
power is interrupted, the electronic
controller will automatically reset the tool
to maximum speed and impact force.
Unexpected starting at maximum operating
speed and impact force could startle the
operator and lead to potential injury.
WARNING
!
grinding, drilling, and other construction
activities contains chemicals known to
hammer
when
cause cancer, birth defects or other
reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement
and other masonry products, and
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.
-4-
Some dust created by
power sanding, sawing,