Anchor MegaVox PRO MEGA-6000U2 Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Altavoces Anchor MegaVox PRO MEGA-6000U2. Anchor MegaVox PRO MEGA-6000U2 16 páginas. Megavox pro public address system
También para Anchor MegaVox PRO MEGA-6000U2: Catálogo (2 páginas), Manual del usuario (4 páginas), Especificaciones (1 páginas), Manual del usuario (4 páginas), Manual del usuario (9 páginas), Manual del usuario (8 páginas)

Imprimir página
Anchor MegaVox PRO MEGA-6000U2 Manual del usuario
MegaVox Pro Control Panel
NOTE:
Instructions
for wireless
operation can
be found on
page 10.
Receiver 1
Controller
Receiver 2
Controller
NOTE:
All in/out line
connections
must be made
with shielded
cable to avoid
hum, buzzing,
or radio
interference.
Wireless Receiver/
8
1. Set all input level controls to minimum before turning on the
power.
2. Plug a microphone into a Mic jack, or an audio source into
the Line-in jack.
3. Turn POWER on, the red LED near the switch will light. If
the LED flashes or dose not light, charge the battery.
4. Slowly increase the level control adjacent to the input jack
used to desired volume.
Power/Battery Indicator
Wireless
Receiver 1
Wireless
Wireless
MEGA-6000U2
Back Panel
Charger Input
MEGA-6000U1
Back Panel
Mic Controller

GENERAL OPERATION

Power Switch
Signal Alert Button
Charging Indicator
Mic/Signal Alert
Controller
Wireless
Receiver 2
Line In
Controller
Line Out Jack
Line In Jack
Speaker Out
Jack
Mic In Jack
Mic Controller
MEGA-6000
Back Panel