Bosch 2 Manual del usuario e instrucciones de instalación - Página 34

Imprimir página

Bosch 2 Manual del usuario e instrucciones de instalación

en Troubleshooting

17 Troubleshooting

You can rectify minor faults on your appliance yourself. Read the troubleshoot-

ing information before contacting after-sales service. This will avoid unneces-

sary costs.

WARNING

Risk of electric shock!

Incorrect repairs are dangerous.

Repairs to the appliance should only be carried out by trained specialist

▶

staff.

Only use genuine spare parts when repairing the appliance.

▶

If the power cord of this appliance is damaged, it must be replaced by the

▶

manufacturer, the manufacturer's Customer Service or a similarly qualified

person in order to prevent any risk.

Fault

The display goes out

and Start / Pause

flashes.

"E:30 / -80"

Cause and troubleshooting

Energy-saving mode is active

Press any button.

▶

a The symbol lights up again.

Drain pipe or water outlet hose is blocked.

Clean the drain pipe and the water outlet hose.

▶

Drain pipe or water drain hose is caught or jammed.

Ensure that the drain pipe and water drain hose are

▶

not kinked or trapped.

Drain pump is blocked.

→ "Cleaning the drain pump", Page 31

▶

The water outlet hose is connected too high.

Install the water outlet hose at a maximum height of

▶

1 metre.

Pump cover is not correctly assembled.

Correctly assemble the pump cover.

▶

Detergent dosage is too high.

Immediate measure: Mix one tablespoon of fabric

▶

softener with 0.5 litres of water and pour the mix-

ture into the left-hand compartment (not for outdoor

clothing, sportswear or items stuffed with down).

Reduce the amount of detergent for the next wash-

▶

ing cycle with the same load.

Unapproved extension installed on the water drain

hose.