Anchor Aurora 51 Manual de instrucciones de instalación - Página 8

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Tienda Anchor Aurora 51. Anchor Aurora 51 13 páginas.

Imprimir página
Raise Side Poles:
8
Insert the sidepoles into the grom-
mets and plates around the perim-
eter. Stand up to nearly vertical
and apply just enough tension on
guys to keep poles in position.
Raise Center Poles:
9
From underneath the tent, insert
the pin of the centerpole through
the grommet at the peak and push
the pole with the fabric up until the
centerpole is vertical. The bottom
of the pole should be positioned
on the mark made in step one.
Jump Rope
Caution: It is
required that all
center poles be
properly anchored
as shown to pre-
vent movement.
Rope goes thru
jump rope hole
in center pole
and ties around
Center Pole
stakes.
Winch for Tension:
10
Straighten the side poles around
the tent so that bottom of poles
are positioned on their respective
marks. Tension guy webs with
ratchets all around tent until poles
are vertical and plumb. Do not
over-tension.
The following tensioning se-
quence is recommended for the
best overall appearance:
1.
Tension webs at the lace lines
first.
2.
Tension webs at the rounded
corners.
3.
Tension webs at the ends.
4.
Tension webs at the valleys
last.
8
Caution: Keep to
side of winch when
tensioning. Do not
extend length of winch
tool.
Winch Tool
Jump Rope