Anchor Navi-Trac Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para Tienda Anchor Navi-Trac. Anchor Navi-Trac 18 páginas. Tent jack
También para Anchor Navi-Trac: Manual del usuario (16 páginas), Instrucciones de montaje (3 páginas)

Imprimir página

HIP END MODULES

FOR RECTANGULAR UNITS

THE RECTANGULAR UNIT IS SIMPLY (2) HIP

ENDS FACING EACH OTHER AND SEPARATED

BY PARALLEL-BEAMED MIDDLE BAYS.

COMPLETING THE HIP END

LIFT SECOND (OPPOSITE) SIDE OF THE

HIP END AND PIN UPRIGHTS INTO POSI-

TION. INSTALL UPRIGHT BRACES AT

INTERMEDIATE POSITIONS. THE CROSS-

CABLE REMAINS AS A PERMANENT PART

OF THE 50' NAVI-TRAC UNIT.

FABRIC NOT SHOWN

LIFT FIRST SIDE AND INSTALL UPRIGHTS (WITH

UPRIGHT BRACES AT INTERMEDIATE LOCATIONS).

NOTE: ONLY FIXED-BASE UPRIGHTS

ARE TO BE USED IN END MODULES.

FOR RECTANGULAR UNITS, FIRST CONSTRUCT

HIP ENDS, INSTALLING FABRIC LOOSELY AND

RAISING EACH SIDE TO INSTALL UPRIGHTS AND

BRACES, JUST AS IN THE SQUARE TENT IN

PRECEDING PAGES.

THE HIP END FABRIC IS INSTALLED THE SAME AS

ON SQUARE UNITS (SEE ILLUSTRATION #9-B).

NOTE: BEFORE INSTALLING FABRIC, BE SURE

ALL PINS AND BOLTS ARE PROPERLY SEATED

AND SECURED WITH LANYARD PINS AS NEEDED.

12-T

12-B