Bosch 3 Manual de instalación, mantenimiento e instrucciones de uso - Página 27
Navegue en línea o descargue pdf Manual de instalación, mantenimiento e instrucciones de uso para Herramienta eléctrica Bosch 3. Bosch 3 36 páginas. Multifuel stove-defra exempt smokeless fuel
También para Bosch 3: Manual de instalación y uso (18 páginas), Manual de instrucciones original (22 páginas), Manual de instrucciones (20 páginas)
Imprimir página
USER INSTRUCTION
CHIMNEY CLEANING
The chimney should be swept at least twice a year. It is important
that the flue connection and chimney are swept prior to lighting up
after a prolonged shutdown period. If the stove is fitted in place
of an open fire then the chimney will require sweeping after a
month of continuous operation. This is a precaution to ensure that
any "softer" deposits left from the open fire usage have not been
loosened by the higher flue temperatures generated by the closed
stove. In situations where it is not possible to sweep through the
stove the installer will have provided alternative means, such as a
soot door. After sweeping the chimney the stove flue outlet and the
flue pipe connecting the stove to the chimney must be cleaned with
a flue brush.
PERIODS OF PROLONGED NON-USE
If the stove is to be left unused for a prolonged period of time then
it should be given a thorough clean to remove ash and unburned
fuel residues. To enable a good flow of air through the appliance
to reduce condensation and subsequent damage, leave the air
controls fully open.
GLASS
• Inspect and clean the glass regularly in order to detect any
cracks. If you spot one, turn the stove off immediately.
• Do not abuse the glass door by striking or slamming shut.
• Do not use the stove if the glass is broken.
• If the glass on your stove breaks, replace only with the glass
supplied from your stove dealer. Never substitute other materials
for the glass.
• Never wash the glass with a product that may scratch. Use a
specialized product, available in the stores where stoves are
sold. The glass should be washed only when cold. Do not clean
hot glass.
To replace damaged door glass follow these steps:
► Open door and lift free of hinge blocks.
► Position the door face down on a soft flat surface so as to
protect the paint work and glass.
► Take off the glass clamp and eight (8) screws and washers.
► Remove glass and dispose of properly.
► When replacing the glass, you should change the glass gasket
to make sure you keep it sealed.
► To help with future removal of screws before reinstalling the
glass clean the screws with light oil and coat with a high
temperature anti-seize grease.
► Fit the new glass sealing rope onto the glass clamp.
► Carefully wrap glass sealing rope around the sides and bottom
edges of the glass.
► Attach the glass sealing rope to the top and side edges of the
glass.
► Position the glass clamp into position and reinsert the
previously removed screws. Evenly tighten the screws until the
glass is held securely. Do not overtighten.
6720818040 B 04/2017
GASKETING
It is recommended that you change the door gasket (which makes
your stove door air tight) once a year, in order to ensure good
control over the combustion, maximum efficiency and security. To
change the door gasket, simply remove the old one. Carefully clean
the available gasket groove, apply a high temperature silicone sold
for this purpose, available from your installer or the manufacturer,
and install the new gasket. You may light up your stove again
approximately 24 hours after having completed this operation.
WARNING: Never operate the stove without
a gasket or with a broken one. Damage to the
stove or even house fire may result.
PAINT
Only clean your stove with a dry soft cloth that will not harm the paint
finish. If the paint becomes scratched or damaged, it is possible to
give your stove a brand new look, by repainting it with a 649°C heat
resistant paint, available from your installer or the manufacturer.
For this purpose, simply scrub the surface to be repainted with fine
wet/dry emery paper, clean it properly, and apply thin coats (2) of
paint successively.
WARNING: Make sure the stove is fully cooled
before attempting to remove any part of the
stove.
1
2
3
4
REMOVING LOG GUARD
9
10
11
12
Lift the log guard away from the supporting brackets and rotate to
clear the sides of the door opening.
1
2
3
4
9
10
11
12
5
6
7
8
13
14
15
16
5
6
7
8
13
14
15
16
27