Anchor PGM-2000 Manual del usuario - Página 2
Navegue en línea o descargue pdf Manual del usuario para Sistema de interfono Anchor PGM-2000. Anchor PGM-2000 5 páginas. Audio intercom system
Imprimir páginaPGM-2000 Owners Manual
DESCRIPTION AND SET-UP
INTRODUCTION
The PGM-2000 is a two-channel Program Insertion Station for use with the
PortaCom intercom system, and provides a means to insert program audio
(from a tape player, mixer, or stage mics) onto the intercom line.
Compact and easy to use, it has the following features:
• Channel selection switch (A or B)
• Audio level control
• Balanced XLR program output
• Unbalanced 1/4" phone program input
• Intercom out connector
• Isolated third channel: normal CH A / Isolated CH C connector
SETTING UP THE SYSTEM
Below is a diagram of a typical TV studio set up; the director may use a
headset or speaker/goosneck mic at the station.
HEADSET
AUDIO/INTERCOM OUT
PROGRAM IN
HEADSET
AC ADAPTER
HEADSET
HEADSET
B3-2000
ISOLATED CHANNEL
C PLUS A
HEADSET
HEADSET
B3-2000
PGM-2000
(CHANNEL A OR B)
HEADSET
PC-2000
HEADSET
OPERATION-FRONT PANEL
PGM-2000 FRONT PANEL CONNECTIONS AND OPERATION
The front panel has the main operator
controls including the CHANNEL A/B
switch, POWER indicator, and PROGRAM
LEVEL SETTING. It also has connectors
for the INTERCOM LINE IN, PROGRAM
common
IN, and INTERCOM OUT.
(pin 1)
channel A
(pin 2)
INTERCOM LINE IN CONNECTOR
Three pin female XLR type connector which accepts the intercom signal from a
PortaCom PC-2000. This is the standard input for the PGM-2000.
channel B
(pin 3)
PROGRAM IN CONNECTOR
1/4-inch phone connector which accepts the line-level output of a mixer, tape player,
(etc) and inserts that music/program material onto the connected intercom system.
INTERCOM OUT CONNECTOR
1/4-inch phone connector which provides a line-level composite of the intercom signal.
Use this output to connect to a recorder or a remote amplifed speaker.
CHANNEL A/B SWITCH
Selects the channel (A or B) whcih the program material will be inserted in the system.
When using the NORMAL A / ISOLATED C output, no program material will be on this
output when the channel switch is set to "B" position.
NOTE: Program cannot be inserted on isolated channel C unless a second PGM-2000 is
used in the system configuration.
PROGRAM LEVEL SETTING ADJUSTMENT SCREW
Adjusts volume level of inserted program material as heard on the intercom system.
Turn clockwise to increase volume of the program material, counter-clockwise for lower
volume.
POWER LED (RED)
Indicator lights when power source is connected to PGM-2000.
(There is no power on/off switch - power is supplied and controlled by the
system's PC-2000)
MADE IN USA
TWO YEAR WARRANTY
2