Anchor ProLink 500 Network Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Sistema de interfono Anchor ProLink 500 Network. Anchor ProLink 500 Network 6 páginas. Wireless intercom

ProLink 500™ Wireless Intercom Owners Manual
WHAT IS PROLINK 500™?
ProLink is a digital wireless, full duplex intercom system that is easy to configure and
easy to operate. You can operate the MASTER belt pack with up to three REMOTE
belt packs which are identified on the side label as R1, R2 or R3. You may also have
an option of unlimited number of "Listen Only" beltpacks.The transmitter and receiver
operate in the license free 902-928 MHz range without the need for a base station.

SYSTEM RANGE

The RF signal will travel through many solid objects. However, the more solid
objects between the belt packs, the more the range will be reduced. When the belt
packs are transmitting, the Transmit LED will flash red. If the signal drops out, the
LED will glow solid red on REMOTE belt packs only. If the belt packs are too far
apart, the REMOTE belt packs need to move closer to the MASTER belt pack.

RECHARGEABLE BATTERIES

ProLink 500 belt packs include three "AA" rechargeable batteries and AC gang charger.
Fully charged batteries yield approximately five hours of continuous use. Alkaline batteries
can be used. Connecting the AC charger to a belt pack with alkaline batteries installed
could seriously damage the system.
INSTALL BATTERIES
1.
Remove battery door
2.
Install three "AA" NiMH batteries
3.
Replace battery compartment door
Caution: Do not attempt to charge alkaline batteries.
Some users are required (for emergency preparedness, etc.) to leave their
ProLink 500 units plugged into the charger at all times.
For those applications we recommend replacing the batteries every 12
months.
CHARGE BATTERIES
1. Connect gang charger (included) into charg-
ing port on the bottom of the belt packs
2. Plug gang charger into AC outlet for minimun
of five hours
LED ON = battery charging
LED OFF = battery charged
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
DEFINITIONS AND APPLICATIONS
ProLink 500 - wireless duplex intercom system
ProLink 500 Network - requires a MASTER belt pack and includes up to three REMOTE belt packs
(option of unlimited number of "Listen Only" beltpacks)
Channel - A or B channel selection for different applications
E x A M P l E 1 - O n e n e t w o r k
MASTER
BP-500M
Channel A
REMOTE 1
BP-500R
Channel A
E x A M P l E 2 - T w o i n d e p e n d a n t n e t w o r k s i n t h e s a m e f a c i l i t y
MASTER
BP-500M
Channel A
REMOTE 1
BP-500R
Channel A
MASTER
BP-500M
Channel B
REMOTE 1
BP-500R
Channel B
E x A M P l E 3 - D i r e c t o r o r c o a c h t a l k i n g a n d l i s t e n i n g b e t w e e n t w o c h a n n e l s
r e q u i r e s t h e f o l l o w i n g c o n f i g u r a t i o n
REMOTE 1
BP-500R
CHANNEL A
MASTER
BP-500M
REMOTE 2
REMOTE 3
Channel A
BP-500R
BP-500R
Channel A
Channel A
This is an assigned group such as the
offense coach or lighting crew
MADE IN USA
TWO YEAR WARRANTY
REMOTE 2
REMOTE 3
BP-500R
BP-500R
Channel A
Channel A
REMOTE 2
REMOTE 3
BP-500R
BP-500R
Channel A
Channel A
REMOTE 2
REMOTE 3
BP-500R
BP-500R
Channel B
Channel B
Head coach or director toggles between Channel
A and Channel B for conversations between a two
ProLink networks
CHANNEL B
MASTER
BP-500M
REMOTE 2
REMOTE 3
Channel B
BP-500R
BP-500R
Channel B
Channel B
This is an assigned group such as the
defense coach or sound crew
2