Bosch 7-115 Manual de instrucciones original - Página 8

Navegue en línea o descargue pdf Manual de instrucciones original para Herramienta eléctrica Bosch 7-115. Bosch 7-115 13 páginas.
También para Bosch 7-115: Manual de instrucciones (30 páginas), Manual de instrucciones (19 páginas), Manual de instrucciones (43 páginas), Manual de instrucciones (7 páginas)

Imprimir página
Bosch 7-115 Manual de instrucciones original
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for roughing metal, stone and
ceramic materials and for drilling tiles.
A special protective guard for cutting must be used when
cutting bonded abrasives.
Sufficient dust extraction must be provided when cutting
stone.
Together with the hand guard (accessory), the power tool
can be used for brushing and sanding with elastic sanding
pads.
The power tool is suitable only for working without water.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Spindle lock button
(2) On/off switch
(3) Hex key
(4) Speed preselection thumbwheel
(GWS 7-115 E | GWS 7-125 S)
Technical Data
Angle grinder
Article number
Rated power input
Rated speed
Max. grinding disc diameter
Internal diameter of disc
Grinding spindle thread
Max. thread length of
grinding spindle
Restart protection
Speed preselection
Weight according to EPTA-Procedure 01:2014
– with low-vibration
auxiliary handle
– with standard auxiliary
handle
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Noise emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise level of the power tool are: 91
dB(A); sound power level 102 dB(A). Uncertainty K = 3 dB.
Bosch Power Tools
(5) Auxiliary handle (insulated gripping surface)
(6) Locking screw for protective guard
(7) Protective guard for grinding
(8) Protective guard for cutting
(9) Mounting flange with O‑ring
(10) Grinding disc/cutting disc
(11) Carbide grinding head
(12) Clamping nut
(13) Quick-clamping nut
(14) Two-pin spanner for clamping nut
(15) Handle (insulated gripping surface)
(16) Grinding spindle
(17) Hand guard
(18) Rubber sanding pad
(19) Abrasive disc
(20) Round nut
(21) Cup brush
(22) Extraction guard for cutting with a guide block
(23) Diamond cutting disc
A) Accessories shown or described are not included with the
GWS 7-100
GWS 7-115 GWS 7-115 E
3 601 C88 1.. 3 601 C88 1.. 3 601 C88 2.. 3 601 C88 1.. 3 601 C88 2..
W
720
-1
min
11000
11000 2800 – 11000
mm
100
mm
16.0
M 10
mm
17
●
–
kg
1.8
kg
1.7
/ II
Wear hearing protection!
Vibration total values a
determined according to EN 60745-2-3:
Surface grinding (roughing):
a
 = 6.5 m/s
h
A)
A)
A)
A)
A)
A)
A)
A)
A)
product as standard. You can find the complete selection of
accessories in our accessories range.
GWS 7-125 GWS 7-125 S
720
720
11000 2800 – 11000
115
115
22.2
22.2
M 14
M 14
22
22
●
●
–
●
1.9
1.9
1.8
1.8
/ II
/ II
(triax vector sum) and uncertainty K
h
2
2
, K = 1.5 m/s
,
1 609 92A 5FG | (25.03.2020)
English | 19
A)
A)
720
720
125
125
22.2
22.2
M 14
M 14
22
22
●
●
–
●
1.9
1.9
1.8
1.8
/ II
/ II