Dream Line ALLURE SHDR-4237728-01 Manual de instrucciones de instalación - Página 10

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Productos de fontanería Dream Line ALLURE SHDR-4237728-01. Dream Line ALLURE SHDR-4237728-01 19 páginas. Shower door

Imprimir página

9. Attach the top and the bottom Pivot assemblies (12) to

the Pivot brackets (09). Make sure the Washer (11) is in

between Pivot assemblies (12) and Pivot brackets (09)

and the rubber gaskets are between the glass and the

metal.

Slide the Glass door (04) into groove of the Pivot

assemblies and tighten the provided fasten bolts.

Push the Magnetic strip on door (23) onto the vertical

edge of the Glass door.

See Fig. 9 for details

NOTE: When adjusting the door glass in

the door pivots, leave a minimum of at

least 1/2" of glass extending beyond the

pivot. Do Not adjust the glass flush to

the pivot.

a) If the width of the opening is less than 37

(without the stationary glass), refer to (Diagram A) with (Packing List A) and follow to

Steps 10-13 to complete the installation.

b) If the width of the opening is greater than 37

stationary glass with glass shelves, use (Diagram A and B) with (Packing List A and B) and

follow to Steps 14-21 to complete the installation.

"Allure" manual Ver.2 04/2016

ATTENTION:

" and you are installing the door only

", and you are installing the door and

Fig. 9