Dream Line ALLURE SHDR-4251728-01 Manual de instrucciones de instalación - Página 13

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Productos de fontanería Dream Line ALLURE SHDR-4251728-01. Dream Line ALLURE SHDR-4251728-01 19 páginas. Shower door

Imprimir página

14. Apply clear silicone along the inner channel of the

Glass profile (05) and push the Stationary glass (25)

inside the channel.

Push the Magnetic strip (33) on the vertical edge of

the Glass door (04).

NOTE: If you have difficulty sliding the Glass profile

over the Stationary glass (25), you can slightly tap

on the Glass profile (05) with a rubber mallet and a

piece of wood. Please do not strike directly on the

profile or on the edge of the glass panel.

Slide the Stationary glass (25) with the Glass profile

(05) into the groove of the Wall profile (06). Push

the Magnetic strip (33) onto the vertical edge of the

Stationary glass (25). Close the Glass door (04).

Adjust the width of the opening section of the Glass

door (04) by loosening the set screws on the pivots.

Level and align the Glass door (04) and the

Stationary glass (25) so that the Magnetic strips

(33) make full contact and hold the door securely in

the closed position.

See Fig. 14 for details

15. Draw a line along the vertical edge of the Wall profile

(06) on the wall. Detach the Wall profile (06) from the

Glass profile (05). Place the Wall profile (06) to the

outlined position and mark the drilling holes through

the predrilled holes in the Wall profile (06).

Now drill the holes in the wall using a Ø5/16" drill bit

and insert the Wall anchors (15) into the holes.

Apply silicone along the Wall profile (06) and around

the holes. Fasten the Wall profile (06) to the wall with

the Round head Screws ST4.2×40 (18).

See Fig. 15 for details

"Allure" manual Ver.2 04/2016

Stationary Glass Installation

Fig. 14

Ø5/16"

Fig. 15