Carlson BRx7 Manual rápido

Navegue en línea o descargue pdf Manual rápido para Receptor Carlson BRx7. Carlson BRx7 2 páginas.
También para Carlson BRx7: Manual (2 páginas)

The Carlson BRx7 GNSS receiver requires SurvCE or SurvPC Version 6.08 or higher.

Here is the instructions for connecting a BRx7 base and rover using the internal UHF radios:

1) Power on your BRx7 base and then tap Equip / GPS Base and set it for Manufacturer: Carlson and

Model: BRx7

2) Tap the "Comms" tab and set it for "Type: Bluetooth" and

"BT Type: Windows Mobile" and tap the "wrenches" icon to the

right. Tap "Find Device" and follow the prompts to select the

serial number of your BRx7 base then tap the Bluetooth plug

icon in the top middle

3) Then tap the Receiver tab and tap next to "Slant" and measure up to

the line where the top Blue cap meets the bottom Grey housing as

shown in the image above (where the Arrow points to the red line) for

your base Antenna Height

4) Attach the silver metal bracket to the bottom of the BRx7 base then

attach the short cable to the UHF antenna port under the dust cap.

Then connect the QT400-T 403-470 MHz antenna to the bracket so it

points straight up in the air.

5) Tap the RTK tab and set it for "Device: Internal Radio" and

"Message Type:

RTCM

6) Tap the "wrenches" next to "Device: Internal Radio" and fill out the

radio using the settings below then tap the Green Check:

Protocol: Satel

Power: 1 watt

Channel: 1: 0 Mhz

New Channel Frequency: 461.0000

Channel Spacing: 25khz

Forward Error Correction: Checked On

***If you have an FCC licensed frequency or a custom frequency you

want to use you can type this into the "New Channel Frequency" box

and it will program Channel #1 to the new frequency.

7) Tap the Green Check and use one of the options in the

"From New Position" or the "From Known position" to start the GPS base

This document contains confidential and proprietary information that remains the property of Carlson Software Inc.

Page 1 of 2

V3.2"

Carlson Software Inc.

33 East 2

Street

Maysville, KY 41056

www.carlsonsw.com

Phone: (606) 564-5028

Fax: (606) 564-6422

Updated 10/29/2020