Ancona Advanta Pro III 36 Instrucciones de uso - Página 9
Navegue en línea o descargue pdf Instrucciones de uso para Campana de ventilación Ancona Advanta Pro III 36. Ancona Advanta Pro III 36 12 páginas.
Imprimir página
Step 3: Relocate motor exhaust at the rear of unit
-
Position the unit on its back on a flat non abrasive surface – perpendicular to your working surface (See Pic
6)
-
Place hand to hold motor in position and ensure weight of motor is well supported (See Pic 6)
o
This will ensure screws don't get bent or broken
-
Remove 4 screws that hold motor in place on the top side of the hood
Ensure the motor weight is well supported by your hand as the last screw in place may break under
o
the weight of the motor
-
Once the motor is set free from the hood, rotate motor clock wise to position venting outlet with rear
rectangular hole, ensuring that:
Electric wire is located under the motor as you relocate the motor outlet (See Pic 7)
o
Electric wire is not caught under the motor outlet (See Pic 8)
o
4 holes are aligned with screw holes at the rear
o
-
Put unit upside down so the screw holes securing the motor are in a position facing you
-
Install 4 screws to hold motor – Use a screw driver to perform operation – NOT A DRILL as it may strip the
motor housing thread (See Pic 9)
Pic 6
Pic 8
Pic 7
Pic 9
9