Athentek Circo Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para GPS Athentek Circo. Athentek Circo 8 páginas. Wearable smart tracking device

Pairing Circo with the app:

On the main page of the Circo app, press "+" on the upper right corner to add a new Circo device.

The first person to add the device becomes its "Host." All others will be "Followers." The Host can

make more changes than Followers can. [Tutorial video: https://goo.gl/xBByqE]

If you need to add multiple Circo to the account repeat 1-4.

1. Enter the Circo ID number on the back of the device when prompted, or scan the QR code

to begin pairing.

2. Enter the mobile phone number of the SIM card.

3. Gently press the power button after Circo lights up.

4. Confirm pairing and wait for the app to complete pairing.

If you are a Follower, you only need to enter the Circo ID number or scan the QR code then wait for

the Host to confirm your follow request. [Tutorial video: https://goo.gl/zmhKAn]

The Host will receive follow request in notification center or choose the device being requested on

the app to find the request.

Main page of the app:

 The main page shows the locations of all the Circo devices you are currently following.

○

 Zoom in on the map to see the current location of each Circo device.

○

 Device status:

○

Choose a Circo device to change its settings see its current status.

A blue dot shows the current location of the mobile phone.

means Circo is currently inside a safe zone.

means Circo is currently outside a safe zone.

Offline mode might be caused by bad cellular reception at the Circo device's

current location, or there could be an SIM card problem.

Sleep mode time can be changed under the device Profile.

If the Circo battery runs low, it will shut down automatically.