Ancona Comfort 9S Manual de instalación y funcionamiento - Página 3
Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Calentador Ancona Comfort 9S. Ancona Comfort 9S 6 páginas. Wall plug-in
Imprimir página1. Install in accordance with national and
local codes
2. Do not install in the shower, sauna or any
wet locations
3. Make sure towel warmer is properly
secured to the wall before use.
Installation
Step 1: Verifying installation parts
Ensure all parts for mounting installation were supplied with your towel warmer. (see fig.1)
-
-
If any are missing, please contact us.
Step 2: Installing wall mount posts (fig. 2)
Locate the following parts:
-
o
d: Metal wall leg
o
e: Screw to set post in main body
o
f: Plastic insert (this insert may already be installed inside the metal post)
o
g: Set Screw (this set screw may already be installed inside the metal post) (see fig.5)
Position parts correctly:
-
o
Plastic insert f) is positioned inside metal leg d)
o
Set screw g) is inserted in metal wall leg d) (see fig.5)
o
If part b) is inserted in part d) remove it
-
Install wall leg d)
o
Position wall leg d) on the main body where the screws can be inserted
o
Insert screw e) and screw wall leg into main body using appropriate sized Allen key
o
Repeat for all 4 wall legs
Model : Comfort 9S Wall Plug-In
24"
Fig. 2
Fig. 1